0

Pistons & Piston Rings

Do your cylinders need to be bored out, or does your engine need to handle more boost than it did from the factory? This category brings together pistons, piston sets, piston rings, wrist pins and circlips for rebuilding and building engines – for you who assemble the engine yourself or are planning a bigger project.

Pistons, rings and pins work together

The piston transfers combustion pressure via the wrist pin to the connecting rod, while the piston rings seal against the cylinder wall and control the oil. Circlips hold the pin in place in the piston. You can choose complete piston sets or individual parts such as piston rings and wrist pins. If the bottom end also needs strengthening, connecting rods and bearings are typically part of the same project.

How to choose pistons and piston rings

Start with the engine's dimensions and purpose, then choose based on these criteria:

  • Bore and oversize: The piston must match the cylinder's finished size. The range includes, for example, standard size and oversizes such as .020 and .040 inch, and the final size depends on how the block is machined.
  • Compression and crown shape: Crown volume (e.g. -14cc or -21cc) and compression ratio affect how much boost and which fuel the engine can run. Valve reliefs may be necessary if you switch to a different camshaft.
  • Ring pack: Ring heights such as 1.0 x 1.0 x 2.0 mm or 1.2 x 1.5 x 2.0 mm must match the piston's ring grooves.
  • Coating: Some pistons have a coated crown or skirt, which can reduce friction and wear – the effect depends on the product.

In this category you will find Wiseco, JE Pistons, CP Pistons, Mahle and Mahle OE, among others, e.g. Mahle pistons for Dodge 12V and 24V diesel engines. Check piston-to-wall clearance, ring end gap and ring orientation according to the manufacturer's instructions before assembling the engine, and follow the recommended break-in procedure.

Frequently asked questions

Should I use standard size or oversize?

It depends on the cylinder's dimensions after measuring. If the cylinder is worn or scored, it is typically bored out, and the piston is chosen to match the finished size. Have an engine machine shop measure the block before you order.

Can I reuse the old piston rings?

This is typically not recommended. The rings wear in against the cylinder wall, and new rings normally give the best seal. If you replace the pistons or hone the cylinders, the rings should also be replaced.

Why is the ring end gap important?

The rings expand when they get hot. If the gap is too small, the ends can butt together and damage the piston and cylinder. The correct gap depends on bore, use and boost – follow the ring manufacturer's instructions.

Should wrist pins and circlips be replaced along with the pistons?

Piston sets often include pins and clips, but it depends on the product. Circlips should typically always be new, as they can lose tension when removed.

View as Grid List
Sort by
Display per page

Toyota 3SGTE 4v Dish -6cc Turbo 86.25mm

wisK615M8625AP
Wiseco Toyota 3SGTE 4v Dished -6cc Turbo 86.25mm +.25mm Oversize Piston Kit
905,65 € excl. VAT

Toyota 3SGTE 4v Dished -6cc TURBO 86.5

wis6615M865AP
Wiseco Toyota 3SGTE 4v Dished -6cc Turbo 86.5mm Piston Shelf Stock (Single Piston)
266,10 € excl. VAT

Toyota 3SGTE 4v Dished -6cc TURBO 86.5

wis6615M865
Wiseco Toyota 3SGTE 4v Dished -6cc Turbo 86.5 Piston Shelf Stock
238,55 € excl. VAT

Toyota 3SGTE 4v Dished -6cc TURBO 86mm

wis6615M86AP
Wiseco Toyota 3SGTE 4v Dished -6cc Turbo 86mm Piston Shelf Stock
264,83 € excl. VAT

Toyota 3SGTE 4v Dished -6cc TURBO 87mm

wisK615M87
Wiseco Toyota 3SGTE 4v Dished -6cc Turbo 87mm Piston Shelf Stock Kit
843,14 € excl. VAT

Toyota 3SGTE 4v Dished -6cc TURBO 87mm

wis6615M87
Wiseco Toyota 3SGTE 4v Dished -6cc Turbo 87mm Piston Shelf Stock
238,55 € excl. VAT

Toyota 3SGTE 4v Dished -6cc TURBO 87mm

wis6615M87AP
Wiseco Toyota 3SGTE 4v Dished -6cc TURBO 87mm Piston Shelf Stock
264,66 € excl. VAT

TOYOTA 3TC TURBO F-TOP 1.375 X 87MM

wis6547M87
Wiseco Toyota 3TC Turbo F-TOP 1.375 X 87MM Piston Shelf Stock
239,50 € excl. VAT

TOYOTA 3TC TURBO F-TOP 1.375 X 87MM

wisK547M87
Wiseco Toyota 3TC Turbo F-TOP 1.375 X 87MM Piston Shelf Stock Kit
821,75 € excl. VAT

TOYOTA 3TC TURBO F-TOP 1.375 X 89MM

wisK547M89
Wiseco Toyota 3TC Turbo F-TOP 1.375 X 89MM Piston Shelf Stock Kit
825,83 € excl. VAT

TOYOTA 3TC,2TG 1.375 C.H. 8600XX

wis6508M86
Wiseco Toyota 3TC2TG 1.375 C.H. 8600XX Piston Shelf Stock
245,28 € excl. VAT

TOYOTA 3TC,2TG 1.375 C.H. 8900XX

wis6508M89
Wiseco Toyota 3TC2TG 1.375 C.H. 8900XX Piston Shelf Stock
245,28 € excl. VAT

TOYOTA 3TC,2TG 1.375 C.H. 6508M87

wisK508M87
Wiseco Toyota 3TC2TG 1.375 C.H. 6508M87 Piston Shelf Stock Kit
844,79 € excl. VAT

TOYOTA 3TC,2TG 1.375 C.H. 8700XX

wis6508M87
Wiseco Toyota 3TC2TG 1.375 C.H. 8700XX Piston Shelf Stock
245,28 € excl. VAT

TOYOTA 3TC,2TG 1.375 C.H.(6508M86)

wisK508M86
Wiseco Toyota 3TC2TG 1.375 C.H.(6508M86) Piston Shelf Stock Kit
844,60 € excl. VAT

TOYOTA 3TC,2TG 1.375 C.H.(6508M89)

wisK508M89
Wiseco Toyota 3TC2TG 1.375 C.H.(6508M89) Piston Shelf Stock Kit
844,36 € excl. VAT

TOYOTA 4AG 1.188 C.H 3189XC

wis6506P81
Wiseco Toyota 4AG 1.188 C.H 3189XC Piston Shelf Stock
190,47 € excl. VAT

TOYOTA 4AG 1.188 C.H 3228XC

wis6506P82
Wiseco Toyota 4AG 1.188 C.H 3228XC Piston Shelf Stock
190,47 € excl. VAT

TOYOTA 4AG 1.208 C.H 3228XC

wis6505P82
Wiseco Toyota 4AG 1.208 C.H 3228XC Piston Shelf Stock
190,47 € excl. VAT

TOYOTA 4AG 1.208 C.H 3228XC

wis6533P82
Wiseco Toyota 4AG 1.208 C.H 3228XC Piston Shelf Stock
190,47 € excl. VAT

TOYOTA 4AG 1.208 C.H 3208XC

wis6505P815
Wiseco Toyota 4AG 1.208 C.H 3208XC Piston Shelf Stock
190,47 € excl. VAT

TOYOTA 4AG 1.208 C.H 3208XC

wis6533P815
Wiseco Toyota 4AG 1.208 C.H 3208XC Piston Shelf Stock
190,47 € excl. VAT

TOYOTA 4AG 4V DOME +5.9cc (6506M815

wisK506M815
Wiseco Toyota 4AG 4V DOME +5.9cc (6506M815 Piston Shelf Stock Kit
841,58 € excl. VAT

TOYOTA 4AG 4V DOME +5.9cc (6533M815

wisK533M815
Wiseco Toyota 4AG 4V DOME +5.9cc (6533M815 Piston Shelf Stock Kit
847,96 € excl. VAT