0

Pistons & Piston Rings

Do your cylinders need to be bored out, or does your engine need to handle more boost than it did from the factory? This category brings together pistons, piston sets, piston rings, wrist pins and circlips for rebuilding and building engines – for you who assemble the engine yourself or are planning a bigger project.

Pistons, rings and pins work together

The piston transfers combustion pressure via the wrist pin to the connecting rod, while the piston rings seal against the cylinder wall and control the oil. Circlips hold the pin in place in the piston. You can choose complete piston sets or individual parts such as piston rings and wrist pins. If the bottom end also needs strengthening, connecting rods and bearings are typically part of the same project.

How to choose pistons and piston rings

Start with the engine's dimensions and purpose, then choose based on these criteria:

  • Bore and oversize: The piston must match the cylinder's finished size. The range includes, for example, standard size and oversizes such as .020 and .040 inch, and the final size depends on how the block is machined.
  • Compression and crown shape: Crown volume (e.g. -14cc or -21cc) and compression ratio affect how much boost and which fuel the engine can run. Valve reliefs may be necessary if you switch to a different camshaft.
  • Ring pack: Ring heights such as 1.0 x 1.0 x 2.0 mm or 1.2 x 1.5 x 2.0 mm must match the piston's ring grooves.
  • Coating: Some pistons have a coated crown or skirt, which can reduce friction and wear – the effect depends on the product.

In this category you will find Wiseco, JE Pistons, CP Pistons, Mahle and Mahle OE, among others, e.g. Mahle pistons for Dodge 12V and 24V diesel engines. Check piston-to-wall clearance, ring end gap and ring orientation according to the manufacturer's instructions before assembling the engine, and follow the recommended break-in procedure.

Frequently asked questions

Should I use standard size or oversize?

It depends on the cylinder's dimensions after measuring. If the cylinder is worn or scored, it is typically bored out, and the piston is chosen to match the finished size. Have an engine machine shop measure the block before you order.

Can I reuse the old piston rings?

This is typically not recommended. The rings wear in against the cylinder wall, and new rings normally give the best seal. If you replace the pistons or hone the cylinders, the rings should also be replaced.

Why is the ring end gap important?

The rings expand when they get hot. If the gap is too small, the ends can butt together and damage the piston and cylinder. The correct gap depends on bore, use and boost – follow the ring manufacturer's instructions.

Should wrist pins and circlips be replaced along with the pistons?

Piston sets often include pins and clips, but it depends on the product. Circlips should typically always be new, as they can lose tension when removed.

View as Grid List
Sort by
Display per page

Suzuki RMZ450 '13-24 13:1 CR 9600ZV

wis40110M09600
Wiseco 13-19 Suzuki RMZ450 13:1 CR 9600ZV Piston
305,00 € excl. VAT

Suzuki RMZ450 '13-26 12.5:1 CR

wis40086M09600
Wiseco Suzuki RMZ450 13-20 12.51 CR Piston kit
266,92 € excl. VAT

Suzuki TL1000R '01-04 12:1 CR 3858XS

wis4704M09800
Wiseco Suzuki TL1000R 01-04 121 CR 3858XS Piston Kit
317,08 € excl. VAT

Suzuki TS125, DS125 '79-81 2205CD

wis449M05600
Wiseco Suzuki TS125/ DS125 79-81 2205CD Piston Kit
179,92 € excl. VAT

Suzuki TS125, DS125 '79-81 2244CD

wis449M05700
Wiseco Suzuki TS125/ DS125 79-81 2244CD Piston Kit
179,92 € excl. VAT

Suzuki TS125, DS125 '79-81 2284CD

wis449M05800
Wiseco Suzuki TS125/ DS125 79-81 2284CD Piston Kit
208,73 € excl. VAT

TOYOTA 20R,22R 1.374 C.H 3701XC

wis6528M94
Wiseco Toyota 20R22R 1.374 C.H 3701XC Piston Shelf Stock
217,41 € excl. VAT

TOYOTA 20R,22R 1.374 C.H 3701XC

wis6528P94
Wiseco Toyota 20R22R 1.374 C.H 3701XC Piston Shelf Stock
166,43 € excl. VAT

TOYOTA 20R,22R 1.533 C.H. (3701XC)

wis6510M94
Wiseco Toyota 20R22R 1.533 C.H. (3701XC) Piston Shelf Stock
200,09 € excl. VAT

TOYOTA 20R,22R FLAT TOP 94MM

wisK528M94
Wiseco Toyota 20R22R FLAT TOP 94MM Piston Shelf Stock Kit
744,09 € excl. VAT

Toyota 2JZ Supra .8cc Dome 10.5:1

wis6678M8625AP
Wiseco Toyota 2JZ Supra -.8cc Dome 10.5:1 CR Piston Shelf Stock (Single Piston Only)
272,20 € excl. VAT

Toyota 2JZ Supra .8cc Dome 10.5:1

wisK678M86AP
Wiseco Toyota 2JZGTE 3.0L 86mm STD Bore 33.98 Comp Ht Asymmetric Skirt Piston Set
1.225,27 € excl. VAT

Toyota 2JZ Supra .8cc Dome 10.5:1

wisK678M87AP
Wiseco Toyota 2JZGTE 3.0L 87mm +1mm Oversize Bore 33.98 Comp Ht Asymmetric Skirt Piston Set
1.225,27 € excl. VAT

Toyota 2JZ Supra .8cc Dome 10.5:1

wisK678M8625AP
Wiseco Toyota 2JZGTE 3.0L 86.25mm +.25mm Oversize Bore 33.98 Comp Ht Asymmetric Skirt Piston Set
1.232,50 € excl. VAT

Toyota 2JZ Supra .8cc Dome 10.5:1

wis6678M865AP
Wiseco Toyota 2JZ Supra -.8cc Dome 10.5:1 CR Piston Shelf Stock (Single Piston Only)
272,20 € excl. VAT

Toyota 2JZ Supra -5.3cc FT 9.5:1

wisK677M87AP
Wiseco Toyota 2JZGTE 3.0L 87mm +1mm Oversize Bore Asymmetric Skirt Piston Set
1.232,53 € excl. VAT

Toyota 2JZ Supra -5.3cc FT 9.5:1

wis6677M86AP
Wiseco Toyota 2JZGTE 3.0L 86mm STD Bore Asymmetric Skirt Single Piston
274,87 € excl. VAT