0

Gaskets & Seals

Is your engine sweating oil at a joint, or does the cylinder head need to come off during a project? Gaskets and seals keep oil, coolant, combustion gases and compression where they belong between the parts of the engine, exhaust and drivetrain. The category covers everything from oil seals and O-rings to complete gasket kits and gasket material for both daily drivers and tuned projects.

What gaskets and seals do

A gasket fills the small irregularities between two surfaces so the joint stays sealed under pressure and heat. Among engine gaskets and seals you will find, for example, head gaskets, intake manifold gasket kits, oil filter housing gaskets and timing belt cover seals. Rotating shafts are typically sealed with oil seals, while O-rings are used in fittings and housings, for example. For the drivetrain there are separate groups for gearbox, differential and transfer case.

How to choose the right gasket

Start with the engine code or the part number of the original part – fitment depends on engine and model year, not just the car model. Then consider:

  • Thickness: A head gasket affects the compression ratio, so the thickness should be chosen based on the engine build and any decking or resurfacing of the cylinder head or block.
  • Bore: With larger pistons, the gasket bore must match the new cylinder diameter, e.g. 83.5 mm on a Cometic head gasket for the Audi 2.5 TFSI.
  • Material: Multi-layer steel (MLS) gaskets can typically handle higher cylinder pressure and boost than soft gaskets, but often require flat surfaces with the correct surface finish.
  • Single part or kit: If several joints need to be opened, a complete kit, such as the Fel-Pro intake manifold kits for the Ford Mustang and Dodge Challenger, can ensure you are not missing a single gasket.

Exhaust, installation and gasket material

Exhaust gaskets sit at the exhaust manifold, headers and flange joints, where heat and vibration put them under heavy stress. New headers may require different gaskets than the originals, so check the flange shape. When installing: clean the surfaces thoroughly, check them for warping, and tighten to the manufacturer's torque and sequence. If no ready-made gasket is available, you can cut your own from gasket material sheets, e.g. for covers and low-pressure flanges.

Brands and engines in the category

Brands include Cometic Gasket, Fel-Pro, Victor Reinz, Vertex Pistons and Wiseco. The range includes parts for engines such as the Ford 302/351W and 4.6/5.4L V8, Nissan RB20/RB26DETT and Audi 2.5 TFSI, as well as a few motorcycle and ATV engines such as the Yamaha YFZ450R.

Frequently asked questions

Can I reuse an old gasket?

It is generally not recommended. A gasket is compressed and conforms to the surfaces on first installation, so it rarely seals as well a second time. This applies especially to head and exhaust gaskets, where pressure and heat are highest.

How do I choose the thickness of a head gasket?

The thickness affects the compression ratio and the clearance between piston and cylinder head. If the head or block has been resurfaced, or different pistons have been fitted, the thickness should be calculated from the actual measurements rather than just the original spec.

Should I use gasket sealant with a new gasket?

It depends on the gasket and the manufacturer's instructions. Many multi-layer steel and coated gaskets should be installed dry, while certain joints, e.g. where two parts meet at a corner, may require a small amount of sealant.

Why is a new gasket leaking?

Typical causes are warped or dirty surfaces, incorrect torque or tightening sequence, reused bolts or a gasket that does not fit the specific engine. Check the surfaces and the engine code before you install a new one.

Gaskets & Seals
View as Grid List
Sort by
Display per page

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5937-040
Cometic AMC 390 70 / 401 72-74 4.250in Bore .040 inch MLS Head Gasket
124,34 € excl. VAT

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5937-120
Cometic AMC 390/401 Gen-3 V8 .120in MLS Cylinder Head Gasket - 4.250in Bore
271,04 € excl. VAT

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5938-040
Cometic AMC 390/401 Gen-3 V8 .040in MLS Cylinder Head Gasket - 4.380in Bore
123,37 € excl. VAT

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5937-098
Cometic AMC 390/401 Gen-3 V8 .098in MLS Cylinder Head Gasket - 4.250in Bore
177,68 € excl. VAT

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5938-051
Cometic AMC 390/401 Gen-3 V8 .051in MLS Cylinder Head Gasket - 4.380in Bore
130,49 € excl. VAT

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5409-040
Cometic AMC 401 for Aftermarket Heads 4.380in Bore .040in MLS Head Gasket
124,78 € excl. VAT

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5937-060
Cometic AMC 390 70 / 401 72-74 4.250in Bore .060 inch MLS-5 Head Gasket
163,93 € excl. VAT

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5937-030
Cometic AMC 390/401 Gen-3 V8 .030in MLS Cylinder Head Gasket - 4.250in Bore
123,34 € excl. VAT

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5937-045
Cometic AMC 390/401 Gen-3 V8 .045in MLS Cylinder Head Gasket - 4.250in Bore
129,55 € excl. VAT

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5937-075
Cometic AMC 390/401 Gen-3 V8 .075in MLS Cylinder Head Gasket - 4.250in Bore
164,06 € excl. VAT

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5938-030
Cometic AMC 390/401 Gen-3 V8 .030in MLS Cylinder Head Gasket - 4.380in Bore
123,34 € excl. VAT

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5937-052
Cometic AMC 390/401 Gen-3 V8 .052in MLS Cylinder Head Gasket - 4.250in Bore
163,64 € excl. VAT

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5937-036
Cometic AMC 390 70 / 401 72-74 4.250in Bore .036 inch MLS Head Gasket
124,34 € excl. VAT

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5937-056
Cometic AMC 390/401 Gen-3 V8 .056in MLS Cylinder Head Gasket - 4.250in Bore
163,67 € excl. VAT

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5938-060
Cometic AMC 390/401 Gen-3 V8 .060in MLS Cylinder Head Gasket - 4.380in Bore
163,38 € excl. VAT

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5937-070
Cometic AMC 390/401 Gen-3 V8 .070in MLS Cylinder Head Gasket - 4.250in Bore
163,71 € excl. VAT

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5937-080
Cometic AMC 390/401 Gen-3 V8 .080in MLS Cylinder Head Gasket - 4.250in Bore
176,96 € excl. VAT

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5938-070
Cometic AMC 390/401 Gen-3 V8 .070in MLS Cylinder Head Gasket - 4.380in Bore
163,71 € excl. VAT

AMC 390/401 Gen-3 V8 Head Gasket

cgsC5937-066
Cometic AMC 390/401 Gen-3 V8 .066in MLS Cylinder Head Gasket - 4.250in Bore
163,71 € excl. VAT

AMC 390/401CI V8 Intake Manifold Gasket

cgsC15003-125
Cometic AMC 390/401CI V8 .125in Fiber Intake Mani Gasket Set-Indy Head-1.20in x 2.30in Rect. Ports
58,35 € excl. VAT

AMC Gen-2/3 V8 Intake Manifold Set

cgsC15196-060
Cometic AMC Gen-2/3 V8 .060in HTS Intake Manifold Gasket Set
42,82 € excl. VAT

AMC Gen-2/3 V8 Intake Manifold Set

cgsC15196FC
Cometic AMC Gen-2/3 V8 .060in FC Intake Manifold Gasket Set
43,32 € excl. VAT

AMC Gen-2/3 V8 Intake Manifold Set

cgsC15002-060
Cometic 70-91 AMC 360 V8 .060inch 1.13 X 2.22 KF Intake Gasket
44,31 € excl. VAT

AMC Gen-2/3 V8 Timing Cover Kit

cgsC5046
Cometic AMC Gen-2/3 V8 Timing Cover Gasket Kit
26,82 € excl. VAT