0

Gaskets & Seals

Is your engine sweating oil at a joint, or does the cylinder head need to come off during a project? Gaskets and seals keep oil, coolant, combustion gases and compression where they belong between the parts of the engine, exhaust and drivetrain. The category covers everything from oil seals and O-rings to complete gasket kits and gasket material for both daily drivers and tuned projects.

What gaskets and seals do

A gasket fills the small irregularities between two surfaces so the joint stays sealed under pressure and heat. Among engine gaskets and seals you will find, for example, head gaskets, intake manifold gasket kits, oil filter housing gaskets and timing belt cover seals. Rotating shafts are typically sealed with oil seals, while O-rings are used in fittings and housings, for example. For the drivetrain there are separate groups for gearbox, differential and transfer case.

How to choose the right gasket

Start with the engine code or the part number of the original part – fitment depends on engine and model year, not just the car model. Then consider:

  • Thickness: A head gasket affects the compression ratio, so the thickness should be chosen based on the engine build and any decking or resurfacing of the cylinder head or block.
  • Bore: With larger pistons, the gasket bore must match the new cylinder diameter, e.g. 83.5 mm on a Cometic head gasket for the Audi 2.5 TFSI.
  • Material: Multi-layer steel (MLS) gaskets can typically handle higher cylinder pressure and boost than soft gaskets, but often require flat surfaces with the correct surface finish.
  • Single part or kit: If several joints need to be opened, a complete kit, such as the Fel-Pro intake manifold kits for the Ford Mustang and Dodge Challenger, can ensure you are not missing a single gasket.

Exhaust, installation and gasket material

Exhaust gaskets sit at the exhaust manifold, headers and flange joints, where heat and vibration put them under heavy stress. New headers may require different gaskets than the originals, so check the flange shape. When installing: clean the surfaces thoroughly, check them for warping, and tighten to the manufacturer's torque and sequence. If no ready-made gasket is available, you can cut your own from gasket material sheets, e.g. for covers and low-pressure flanges.

Brands and engines in the category

Brands include Cometic Gasket, Fel-Pro, Victor Reinz, Vertex Pistons and Wiseco. The range includes parts for engines such as the Ford 302/351W and 4.6/5.4L V8, Nissan RB20/RB26DETT and Audi 2.5 TFSI, as well as a few motorcycle and ATV engines such as the Yamaha YFZ450R.

Frequently asked questions

Can I reuse an old gasket?

It is generally not recommended. A gasket is compressed and conforms to the surfaces on first installation, so it rarely seals as well a second time. This applies especially to head and exhaust gaskets, where pressure and heat are highest.

How do I choose the thickness of a head gasket?

The thickness affects the compression ratio and the clearance between piston and cylinder head. If the head or block has been resurfaced, or different pistons have been fitted, the thickness should be calculated from the actual measurements rather than just the original spec.

Should I use gasket sealant with a new gasket?

It depends on the gasket and the manufacturer's instructions. Many multi-layer steel and coated gaskets should be installed dry, while certain joints, e.g. where two parts meet at a corner, may require a small amount of sealant.

Why is a new gasket leaking?

Typical causes are warped or dirty surfaces, incorrect torque or tightening sequence, reused bolts or a gasket that does not fit the specific engine. Check the surfaces and the engine code before you install a new one.

Gaskets & Seals
View as Grid List
Sort by
Display per page

Air Crossover Gasket

felMS96154
Fel-Pro Volvo XC90 MS 96154 Engine Intake Manifold Gasket Set
29,27 € excl. VAT

Air Crossover Gasket

felMS963841
Fel-Pro Acura TL MS 96384-1 Fuel Injection Plenum Gasket Set
115,50 € excl. VAT

Air Crossover Gasket

felMS93391
Fel-Pro Ford Ranger MS 93391 Engine Intake Manifold Gasket Set
22,09 € excl. VAT

Air Crossover Gasket

fel1248
Fel-Pro 1248 Engine Intake Manifold Gasket Set
41,05 € excl. VAT

Air Crossover Gasket

felMS97181
Fel-Pro Ford F-150 MS 97181 Engine Intake Manifold Gasket Set
48,42 € excl. VAT

Air Crossover Gasket

fel12535
Fel-Pro 1253-5 Engine Intake Manifold Gasket Set
61,97 € excl. VAT

Air Crossover Gasket

felMS95647
Fel-Pro Ford F-150 MS 95647 Engine Intake Manifold Gasket Set
21,54 € excl. VAT

Air Crossover Gasket

felMS94370
Fel-Pro Geo Metro MS 94370 Engine Intake Manifold Gasket Set
17,76 € excl. VAT

Air Crossover Gasket

felMS98007T1
Fel-Pro Mercury Grand Marquis MS 98007 T-1 Engine Intake Manifold Gasket Set
136,98 € excl. VAT

Air Crossover Gasket

fel1354
Fel-Pro 1354 Engine Intake Manifold Gasket Set
22,65 € excl. VAT

Air Crossover Gasket

felMS970441
Fel-Pro Lexus GX460 MS 97044-1 Engine Intake Manifold Gasket Set
33,28 € excl. VAT

Air Crossover Gasket

felMS964542
Fel-Pro Nissan Frontier Engine Intake Manifold Gasket Set
62,92 € excl. VAT

Air Crossover Gasket

felMS95839
Fel-Pro Pontiac Grand Am MS 95839 Engine Intake Manifold Gasket Set
45,27 € excl. VAT

Air Crossover Gasket

felMS95205
Fel-Pro MS 95205 Engine Intake Manifold Gasket Set
63,74 € excl. VAT

Air Crossover Gasket

felMS94135
Fel-Pro Toyota Corolla MS 94135 Engine Intake Manifold Gasket Set
13,77 € excl. VAT

Air Crossover Gasket

felMS97400
Fel-Pro Jeep Compass MS 97400 Engine Intake Manifold Gasket Set
26,37 € excl. VAT

Air Crossover Gasket

felMS96859
Fel-Pro Suzuki Forenza MS 96859 Engine Intake Manifold Gasket Set
15,56 € excl. VAT

Air Crossover Gasket

felMS96750
Fel-Pro Subaru Impreza MS 96750 Engine Intake Manifold Gasket Set
19,79 € excl. VAT

Air Crossover Gasket

felMS93223
Fel-Pro Volkswagen Jetta MS 93223 Engine Intake Manifold Gasket Set
30,90 € excl. VAT

Air Crossover Gasket

fel1204
Fel-Pro Chevrolet Small Block 262/265/267/283 Engine Intake Manifold Gasket Set - 0.060in Thickness
35,00 € excl. VAT

Air Crossover Gasket

felMS95406
Fel-Pro Toyota Camry MS 95406 Engine Intake Manifold Gasket Set
89,23 € excl. VAT

Air Crossover Gasket

felMS99901
Fel-Pro MS 9990-1 Engine Intake Manifold Gasket Set
39,06 € excl. VAT

Air Crossover Gasket

felMS9001SH1
Fel-Pro MS 9001 SH-1 Engine Intake Manifold Gasket Set
32,72 € excl. VAT

Air Crossover Gasket

felMS96900
Fel-Pro Mitsubishi Eclipse MS 96900 Engine Intake Manifold Gasket Set
46,64 € excl. VAT