0

Gaskets & Seals

Is your engine sweating oil at a joint, or does the cylinder head need to come off during a project? Gaskets and seals keep oil, coolant, combustion gases and compression where they belong between the parts of the engine, exhaust and drivetrain. The category covers everything from oil seals and O-rings to complete gasket kits and gasket material for both daily drivers and tuned projects.

What gaskets and seals do

A gasket fills the small irregularities between two surfaces so the joint stays sealed under pressure and heat. Among engine gaskets and seals you will find, for example, head gaskets, intake manifold gasket kits, oil filter housing gaskets and timing belt cover seals. Rotating shafts are typically sealed with oil seals, while O-rings are used in fittings and housings, for example. For the drivetrain there are separate groups for gearbox, differential and transfer case.

How to choose the right gasket

Start with the engine code or the part number of the original part – fitment depends on engine and model year, not just the car model. Then consider:

  • Thickness: A head gasket affects the compression ratio, so the thickness should be chosen based on the engine build and any decking or resurfacing of the cylinder head or block.
  • Bore: With larger pistons, the gasket bore must match the new cylinder diameter, e.g. 83.5 mm on a Cometic head gasket for the Audi 2.5 TFSI.
  • Material: Multi-layer steel (MLS) gaskets can typically handle higher cylinder pressure and boost than soft gaskets, but often require flat surfaces with the correct surface finish.
  • Single part or kit: If several joints need to be opened, a complete kit, such as the Fel-Pro intake manifold kits for the Ford Mustang and Dodge Challenger, can ensure you are not missing a single gasket.

Exhaust, installation and gasket material

Exhaust gaskets sit at the exhaust manifold, headers and flange joints, where heat and vibration put them under heavy stress. New headers may require different gaskets than the originals, so check the flange shape. When installing: clean the surfaces thoroughly, check them for warping, and tighten to the manufacturer's torque and sequence. If no ready-made gasket is available, you can cut your own from gasket material sheets, e.g. for covers and low-pressure flanges.

Brands and engines in the category

Brands include Cometic Gasket, Fel-Pro, Victor Reinz, Vertex Pistons and Wiseco. The range includes parts for engines such as the Ford 302/351W and 4.6/5.4L V8, Nissan RB20/RB26DETT and Audi 2.5 TFSI, as well as a few motorcycle and ATV engines such as the Yamaha YFZ450R.

Frequently asked questions

Can I reuse an old gasket?

It is generally not recommended. A gasket is compressed and conforms to the surfaces on first installation, so it rarely seals as well a second time. This applies especially to head and exhaust gaskets, where pressure and heat are highest.

How do I choose the thickness of a head gasket?

The thickness affects the compression ratio and the clearance between piston and cylinder head. If the head or block has been resurfaced, or different pistons have been fitted, the thickness should be calculated from the actual measurements rather than just the original spec.

Should I use gasket sealant with a new gasket?

It depends on the gasket and the manufacturer's instructions. Many multi-layer steel and coated gaskets should be installed dry, while certain joints, e.g. where two parts meet at a corner, may require a small amount of sealant.

Why is a new gasket leaking?

Typical causes are warped or dirty surfaces, incorrect torque or tightening sequence, reused bolts or a gasket that does not fit the specific engine. Check the surfaces and the engine code before you install a new one.

Gaskets & Seals
View as Grid List
Sort by
Display per page

Air Crossover Gasket

felMS959853
Fel-Pro Ford Freestar MS 95985-3 Engine Intake Manifold Gasket Set
78,01 € excl. VAT

Air Crossover Gasket

felMS956121
Fel-Pro Honda Accord MS 95612-1 Engine Intake Manifold Gasket Set
32,60 € excl. VAT

Air Crossover Gasket

felMS95402
Fel-Pro Geo Tracker MS 95402 Engine Intake Manifold Gasket Set
28,96 € excl. VAT

Air Crossover Gasket

felMS97362
Fel-Pro RAM 2500 Engine Intake Manifold Gasket Set
29,50 € excl. VAT

Air Crossover Gasket

felMS97187
Fel-Pro Land Rover Range Rover MS 97187 Engine Intake Manifold Gasket Set
98,58 € excl. VAT

Air Crossover Gasket

felMS92438
Fel-Pro Chevrolet Corvette Engine Intake Manifold Gasket Set
43,74 € excl. VAT

Air Crossover Gasket

felMS959852
Fel-Pro Ford Windstar MS 95985-2 Engine Intake Manifold Gasket Set
113,50 € excl. VAT

Air Crossover Gasket

fel1232
Fel-Pro 1232 Engine Intake Manifold Gasket Set
22,43 € excl. VAT

Air Crossover Gasket

felMS97618
Fel-Pro Honda Fit MS 97618 Engine Intake Manifold Gasket Set
40,55 € excl. VAT

Air Crossover Gasket

felMS93255
Fel-Pro Ford Escort MS 93255 Engine Intake Manifold Gasket Set
18,98 € excl. VAT

Air Crossover Gasket

fel1234
Fel-Pro 1234 Engine Intake Manifold Gasket Set
53,30 € excl. VAT

Air Crossover Gasket

felMS97419
Fel-Pro Ford Escape MS 97419 Engine Intake Manifold Gasket Set
45,46 € excl. VAT

Air Crossover Gasket

felMS90610
Fel-Pro Isuzu Rodeo MS 90610 Engine Intake Manifold Gasket Set
71,23 € excl. VAT

Air Crossover Gasket

felMS96718
Fel-Pro Chevrolet Corvette MS 96718 Engine Intake Manifold Gasket Set
70,78 € excl. VAT

Air Crossover Gasket

felMS93205
Fel-Pro Dodge RAM 1500 Engine Intake Manifold Gasket Set
30,67 € excl. VAT

Air Crossover Gasket

felMS97200
Fel-Pro Ford E-350 Super Duty MS 97200 Engine Intake Manifold Gasket Set
57,83 € excl. VAT

Air Crossover Gasket

felMS96163
Fel-Pro Dodge Neon MS 96163 Engine Intake Manifold Gasket Set
15,62 € excl. VAT

Air Crossover Gasket

felMS91473
Fel-Pro Chrysler Sebring Engine Intake Manifold Gasket Set
20,24 € excl. VAT

Air Crossover Gasket

felMS97302
Fel-Pro Volkswagen Touareg MS 97302 Engine Intake Manifold Gasket Set
64,00 € excl. VAT

Air Crossover Gasket

felMS97538
Fel-Pro BMW 645Ci MS 97538 Engine Intake Manifold Gasket Set
49,94 € excl. VAT

Air Crossover Gasket

felMS96538
Fel-Pro Saturn Vue MS 96538 Engine Intake Manifold Gasket Set
58,68 € excl. VAT

Air Crossover Gasket

felMS97619
Fel-Pro Honda CR-V MS 97619 Engine Intake Manifold Gasket Set
21,13 € excl. VAT

Air Crossover Gasket

felMS94456
Fel-Pro Toyota Camry MS 94456 Engine Intake Manifold Gasket Set
119,38 € excl. VAT

Air Crossover Gasket

fel12533
Fel-Pro 1253-3 Engine Intake Manifold Gasket Set
55,76 € excl. VAT