0

Exhaust

Want a deeper sound or better flow for your car, or do you just need new parts after rust and wear? Here you'll find complete exhaust systems and individual parts, from exhaust manifolds and catalytic converters to mufflers, pipes, clamps and heat protection. This category is for you if you want to replace, upgrade or build a completely new system for your project.

What do the individual exhaust parts do?

The exhaust carries gases from the engine out under the car and affects sound, back pressure and heat. The exhaust manifold sits closest to the engine. On many projects it is replaced by headers, which are manifolds with a separate pipe for each cylinder and can improve flow. Next come catalytic converters and mid-pipes such as H-pipes and X-pipes, which connect the two pipe runs on V engines. Last come mufflers and resonators, which shape the sound and reduce drone.

How to choose an exhaust

First decide how much of the system you want to replace. A cat-back system replaces everything after the catalytic converter and is typically a straightforward choice if sound and looks are your goal. An axle-back system replaces only the section behind the rear axle. Among the complete exhaust systems you'll find cat-back systems from Flowmaster and Diamond Eye, for example, and Kooks is one example of a header brand. The category also includes parts from Magnaflow, Borla, aFe, Gibson and Stainless Works, among others. Then choose based on several factors:

  • Pipe diameter: Too large a diameter can lower gas velocity and reduce low-end torque. The right size depends on the engine, your power goals and whether the car has a turbo.
  • Material: Stainless steel typically lasts longer than aluminized steel. Titanium is lighter but is harder to weld and repair.
  • Sound: Sound level and character depend on how the muffler is built and whether the system has a resonator.
  • Fitment: Check model year, engine, body style and transmission. Some systems only fit certain cab configurations, for example.

Installation and maintenance

The exhaust is exposed to heat and vibration, so hangers, gaskets and joints need to be in good condition. Quality clamps and new rubber hangers reduce the risk of leaks and rattles. Headers can raise engine bay temperatures. Heat shields or heat wrap can protect wiring, hoses and the floor pan from overheating. Re-tighten the joints after the first few drives, as gaskets and flanges typically settle.

Frequently asked questions

What is the difference between cat-back and axle-back?

A cat-back system replaces the pipes, mufflers and tips from the catalytic converter back. An axle-back system replaces only the section behind the rear axle, typically the rear muffler and the tips. Cat-back usually changes the sound more, while axle-back is easier to install.

Can a new exhaust pass inspection?

That depends on the product and the car. Sound level, catalytic converter and any E-mark must be checked for the specific part number. Changes to the catalytic converter can affect emissions, and parts intended for competition use are typically not approved for road use.

Do headers add power?

Headers can improve flow, but the gain depends on the engine, pipe length, pipe diameter and the rest of the system. Long-tube headers typically give a different power curve than shorty headers, and getting the full benefit often requires an engine tune.

Why does my exhaust drone at a steady speed?

Drone typically occurs at certain engine speeds, when the sound hits the cabin's resonant frequency. A resonator or a different type of muffler can reduce the problem, but the result depends on the car, the pipe lengths and how the system is built.

Exhaust
View as Grid List
Sort by
Display per page

BORLA Universal Tip - Dual Round

bor20203
Borla Universal Polished Tip Dual Round Intercooled (inlet 2 1/2in. Outlet 3in) *NO Returns*
320,44 € excl. VAT

BORLA Universal Tip - Round

bor20248
Borla 2.25in Inlet 4in Round Rolled Angle Cut Resonated x 13in Long Exhaust Tip
96,11 € excl. VAT

BORLA Universal Tip - Round

bor20103
Borla Universal Polished Tip Single Round Intercooled (inlet 2 1/4in. Outlet 2 1/2in)
87,35 € excl. VAT

BORLA Universal Tip - Round

bor20102
Borla Universal Polished Tip Single Round Intercooled (inlet 2in. Outlet 2 1/2in)
87,35 € excl. VAT

BORLA Universal Tip - Round

bor20156
Borla Universal Polished Tip Single Round Rolled Angle-Cut w/Clamp (inlet 2 1/2in. Outlet 4 x 4in) *
104,97 € excl. VAT

BORLA Universal Tip - Round

bor20106
Borla Universal Polished Tip Single Round Angle-Cut (inlet 2 1/4in. Outlet 2 1/4in)
77,48 € excl. VAT

BORLA Universal Tip - Round

bor20245
Borla 2.25in Inlet 4in Round Rolled Angle Cut x 12in Long Embossed Exhaust Tip
105,26 € excl. VAT

BORLA Universal Tip - Round

bor20249
Borla 4in Inlet 5in Round Rolled Angle Cut w/ Clamp x 14in Long Exhaust Tip
142,63 € excl. VAT

BORLA Universal Tip - Round

bor20251
Borla 3in Inlet 4.25in Round Rolled Angle Cut x 4in Long Universal Exhaust Tips
77,52 € excl. VAT

BORLA Universal Tip - Round

bor20246
Borla Universal Exhaust Tips
112,27 € excl. VAT

BORLA Universal Tip - Square

bor20132
Borla Universal Polished Tip Single Square Angle-Cut Intercooled (inlet 2 1/2in. Outlet 2 7/8 x 2 3/
111,92 € excl. VAT

BORLA Universal Tip - Square

bor20241
Borla 2.25in Inlet 3.28in x 3.5in Square Rolled Angle Cut x 7.88in Long Exhaust Tip
89,95 € excl. VAT

BORLA Universal Tip - Square

bor20115
Borla Universal Polished Tip Single Square Angle-Cut Intercooled (inlet 2 1/4in. Outlet 2 1/2 x 2 3/
125,92 € excl. VAT

BORLA Universal Tip - Turn Down/Out

bor20110
Borla Universal Polished Tip Single Round Turndown/Turnout (inlet 2 1/2in. Outlet 2 1/2in) *NO Retur
118,19 € excl. VAT

BORLA Wheelbase Extension Pipe

bor60693
Borla 17-19 Ford F-250/ F-350 Extension Pipe Adapt Cat-Back - 176in WB
204,66 € excl. VAT

BORLA X-Pipe

bor60087
Borla Corvette Z06 X Pipe
733,29 € excl. VAT

BORLA X-Pipe With Mid-Pipes

bor60607
Borla 2016 Camaro SS 6.2L V8 X-Pipe w/ Mid Pipes
1.245,55 € excl. VAT

BORLA X-Pipe With Mid-Pipes

bor60610
Borla 2016 Camaro SS 6.2L V8 X-Pipe w/ Mid Pipes w/ AFM Valves
1.564,02 € excl. VAT

BORLA XR-1 Multi-Core Muffler

bor400373
Borla XR-1 Multi-Core 3in Ctr-Ctr Round 16in x 6.25in Rotary Engine Equipped Racing Muffler
399,61 € excl. VAT

BORLA XR-1 Multi-Core Muffler

bor401382
Borla XR-1 Low Profile Multicore 2.5IN Outlet/Inlet / 4IN x 16IN / 21IN OAL Round Muffler
330,62 € excl. VAT

BORLA XR-1 Multi-Core Muffler

bor400371
Borla XR-1 Multi-Core 3in Ctr-Ctr Oval 16in x 4.25in x 7.88in Rotary Engine Equipped Racing Muffler
370,53 € excl. VAT

BORLA XR-1 Multi-Core Muffler

bor400024
Borla Universal Performance 2.5in Inlet/Outlet Stainless Racing Muffler
379,50 € excl. VAT

BORLA XR-1 Multi-Core Muffler

bor401383
Borla XR-1 Multicore 2.5in Inlet 4in Outlet RDX 14in
334,21 € excl. VAT

BORLA XR-1 Sportsman Muffler

bor40942
Borla XR-1 Racing Sportsman 2 1/2 inch Outlet / 2 1/2 inch Inlet 16in Case Oval Muffler
217,97 € excl. VAT