0

Exhaust

Want a deeper sound or better flow for your car, or do you just need new parts after rust and wear? Here you'll find complete exhaust systems and individual parts, from exhaust manifolds and catalytic converters to mufflers, pipes, clamps and heat protection. This category is for you if you want to replace, upgrade or build a completely new system for your project.

What do the individual exhaust parts do?

The exhaust carries gases from the engine out under the car and affects sound, back pressure and heat. The exhaust manifold sits closest to the engine. On many projects it is replaced by headers, which are manifolds with a separate pipe for each cylinder and can improve flow. Next come catalytic converters and mid-pipes such as H-pipes and X-pipes, which connect the two pipe runs on V engines. Last come mufflers and resonators, which shape the sound and reduce drone.

How to choose an exhaust

First decide how much of the system you want to replace. A cat-back system replaces everything after the catalytic converter and is typically a straightforward choice if sound and looks are your goal. An axle-back system replaces only the section behind the rear axle. Among the complete exhaust systems you'll find cat-back systems from Flowmaster and Diamond Eye, for example, and Kooks is one example of a header brand. The category also includes parts from Magnaflow, Borla, aFe, Gibson and Stainless Works, among others. Then choose based on several factors:

  • Pipe diameter: Too large a diameter can lower gas velocity and reduce low-end torque. The right size depends on the engine, your power goals and whether the car has a turbo.
  • Material: Stainless steel typically lasts longer than aluminized steel. Titanium is lighter but is harder to weld and repair.
  • Sound: Sound level and character depend on how the muffler is built and whether the system has a resonator.
  • Fitment: Check model year, engine, body style and transmission. Some systems only fit certain cab configurations, for example.

Installation and maintenance

The exhaust is exposed to heat and vibration, so hangers, gaskets and joints need to be in good condition. Quality clamps and new rubber hangers reduce the risk of leaks and rattles. Headers can raise engine bay temperatures. Heat shields or heat wrap can protect wiring, hoses and the floor pan from overheating. Re-tighten the joints after the first few drives, as gaskets and flanges typically settle.

Frequently asked questions

What is the difference between cat-back and axle-back?

A cat-back system replaces the pipes, mufflers and tips from the catalytic converter back. An axle-back system replaces only the section behind the rear axle, typically the rear muffler and the tips. Cat-back usually changes the sound more, while axle-back is easier to install.

Can a new exhaust pass inspection?

That depends on the product and the car. Sound level, catalytic converter and any E-mark must be checked for the specific part number. Changes to the catalytic converter can affect emissions, and parts intended for competition use are typically not approved for road use.

Do headers add power?

Headers can improve flow, but the gain depends on the engine, pipe length, pipe diameter and the rest of the system. Long-tube headers typically give a different power curve than shorty headers, and getting the full benefit often requires an engine tune.

Why does my exhaust drone at a steady speed?

Drone typically occurs at certain engine speeds, when the sound hits the cabin's resonant frequency. A resonator or a different type of muffler can reduce the problem, but the result depends on the car, the pipe lengths and how the system is built.

Exhaust
View as Grid List
Sort by
Display per page

BORLA Cat-Back System - Touring

bor140558
Borla Touring Cat Back 15-16 Chevy Suburban 5.3L V8 2.75in, 2.25in Dual Same Side Exit 4in Tips
1.776,41 € excl. VAT

BORLA Cat-Back System - Touring

bor140617
Borla 15-16 Ford F-150 3.5L EcoBoost Ext. Cab Std. Bed Catback Exhaust Touring Truck Side Exit
1.916,41 € excl. VAT

BORLA Cat-Back System - Touring

bor140406
Borla 11-16 Jeep Grand Cherokee Limited/Laredo 5.7L 8cyl 4WD/RWD SS Catback Exhaust
2.258,03 € excl. VAT

BORLA CrateMuffler - ATAK

bor400856
Borla CrateMuffler Ford 5.0L Coyote ATAK 2.5in Offset/Center 12in x 6in x 10.34in Muffler
615,40 € excl. VAT

BORLA CrateMuffler - ATAK

bor400852
Borla CrateMuffler BBC 396/402/427 ATAK 2.5 inch ID Offset/Center 14in x 4.35in x 9in Oval Muffler
406,33 € excl. VAT

BORLA CrateMuffler - ATAK

bor400841
Borla CrateMuffler SBC Hot 350/383 3inch Offset/Offset 14in x 4.35in x 9in Oval Muffler
453,95 € excl. VAT

BORLA CrateMuffler - ATAK

bor400832
Borla CrateMuffler SBF 289/302 2.5 inch Offset/Center 14in x 4.35in x 9in Oval Muffler
379,78 € excl. VAT

BORLA CrateMuffler - ATAK

bor400958
Borla CrateMuffler LS3 3in Offset/Center 14in x 4.35in x 9.10in Oval Muffler ATAK
443,77 € excl. VAT

BORLA CrateMuffler - ATAK

bor400960
Borla CrateMuffler LS3 3in Offset In/Offset Out 14in x 4.35in x 9.10in Oval Muffler ATAK
440,35 € excl. VAT

BORLA CrateMuffler - ATAK

bor400820
Borla CrateMuffler SBC Hot 350/383 2.5 inch Offset/Center 14in x 4.35in x 9in Oval Atak Muffler
457,40 € excl. VAT

BORLA CrateMuffler - S-Type

bor400855
Borla CrateMuffler Ford Coyote 5.0L S-Type 2.5in Offset/Center 12inx6inx10.34in Muffler
600,57 € excl. VAT

BORLA CrateMuffler - S-Type

bor400846
Borla CrateMuffler SBC 283/327/350 2.25 inch Offset In/Out 14in x 4.35in x 9in Oval S-Type Muffler
414,54 € excl. VAT

BORLA CrateMuffler - S-Type

bor400957
Borla CrateMuffler LS3 3in Offset/Center 14in x 4.35in x 9.10in Oval Muffler S-Type
450,23 € excl. VAT

BORLA CrateMuffler - S-Type

bor400840
Borla CrateMuffler SBC Hot 350/383 3 inch Offset/Center 14in x 4.35in x 9in Oval Muffler
412,39 € excl. VAT

BORLA Mid-Section Exhaust System

bor60638
Borla 2017 Ford Raptor 3.5L EcoBoost AT/MT 2wd/4wd ATAK X Pipe
1.908,81 € excl. VAT

BORLA Muffler / Resonator

bor60561
Borla 15-17 Ford Mustang GT 5.0L Touring Muffler (Does Not Fit OEM Exhaust)
696,18 € excl. VAT

BORLA Optional Resonator

bor60667
Borla 2019 RAM 1500 5.7L V8 AT 2+4WD 4DR CC SB (5ft7in Box) 144.6in WB 3in Optional Front Muffler
315,08 € excl. VAT

BORLA ProXS Muffler

bor400487
Borla Universal Center/Dual Oval 3in In / 2.5in Out 19in x 4in x 9.5in Notched PRO-XS Muffler
255,94 € excl. VAT

BORLA ProXS Muffler

bor400489
Borla Universal Pro-XS Oval 2.25in Inlet / Outlet Offset Notched Muffler
185,76 € excl. VAT

BORLA ProXS Muffler

bor40658
Borla 2.25n Inlet/Outlet Center/Offset Oval ProXS Muffler
166,46 € excl. VAT

BORLA ProXS Muffler

bor40670
Borla 3in Inlet/Dual 2.25in Outlet Center/Dual Oval ProXS Muffler
246,34 € excl. VAT

BORLA ProXS Muffler

bor40352
Borla Universal Pro-XS Muffler - Offset/Offset Oval 2.5in
171,89 € excl. VAT

BORLA ProXS Muffler

bor400478
Borla Universal Center/Offset Oval 2.25in Tubing 14in x 4in x 9.5in PRO-XS Notched Muffler
174,95 € excl. VAT

BORLA ProXS Muffler

bor40665
Borla Universal Performance 2.5in Inlet/Outlet Turbo XL Muffler
204,73 € excl. VAT