0

Engines & Components

Is your engine stripped down on the bench, or do you just need new valve springs for the cylinder head? In this category we bring together engine parts for projects that demand more than the original parts can handle: pistons, connecting rods, crankshafts, camshafts, bearings, oiling systems and cylinder heads. The parts are aimed at you if you are building for higher boost, more revs or track use.

What the parts in the engine do

An engine consists of systems that have to work together. The rotating assembly – crankshaft, connecting rods and pistons – converts combustion pressure into torque, while the camshaft and valvetrain control when air flows in and out. Bearings and the oiling system keep the moving parts separated by an oil film, and the cylinder head has a major influence on how well the engine breathes. If you increase boost or revs, the load on every part rises, and the weakest link sets the limit. So plan the whole project before you buy individual parts, or take a look at a complete engine kit with rotating assembly.

How to choose pistons and connecting rods

The pistons must match the bore, stroke, rod length and the compression ratio you want. For high-boost engines, lower compression is typically chosen, often via a dish in the piston crown. Also look at the ring pack, wrist pin and any coating. The range includes, for example, Wiseco piston kits and ring sets as well as Manley piston kits for the Chrysler 6.4L Hemi, and JE Pistons and Eagle are also among the brands. The connecting rods must be able to withstand the increased load and have a length that suits the piston and crankshaft – especially in stroker projects where the stroke is changed.

Camshaft and valvetrain must match

A camshaft with more lift and longer duration can move the power band upwards, but the valve springs, retainers and valve locks must be able to keep up. Too little spring pressure can cause valve float at high revs, while unnecessarily high pressure can increase wear on the cam and lifters. So choose based on lift, spring pressure, piston-to-valve clearance and how the engine is used. COMP Cams, for example, offers a beehive spring kit with steel retainers for the Dodge 5.7L Hemi model years 03-08, designed for 0.600 inch lift.

Installation, tolerances and break-in

High-performance engine parts require precise installation. Bearing clearance, piston clearance and ring gap must be measured and adjusted according to the manufacturer's instructions, and the ring gap depends on factors such as bore and application. Check that the parts fit your specific engine and build, including bore, compression height and bearing dimensions. An upgraded oiling system can be relevant at high revs or for track use, where oil pressure can drop in hard corners. After assembly, the engine is typically broken in according to the manufacturer's instructions, and the first oil change is done early to remove wear particles.

Frequently asked questions

Do I need to change pistons if I increase boost?

It depends on the engine, the original pistons and how much the boost is increased. For bigger changes, lower-compression pistons are typically chosen, but the choice should be assessed together with connecting rods, fuel and engine management.

Should the camshaft and valve springs be replaced at the same time?

Often, yes. A camshaft with more lift or a more aggressive profile may require different springs, retainers and valve locks. Check the cam manufacturer's recommended spring pressure and the piston-to-valve clearance before you assemble the engine.

Can I assemble the engine myself with the new parts?

It requires experience, precise measuring tools and the manufacturer's specifications. Bearing clearance, ring gap and torque specs must be checked carefully. If you don't have the equipment, the safest option is to let an engine shop handle the assembly.

Engines & Components
View as Grid List
Sort by
Display per page

Variable Valve Timing Sprocket

gatVCP935
Gates 02-04 Toyota Camry 4-Cyl. 2.4L Engine Variable Valve Timing Sprocket
321,58 € excl. VAT

Variable Valve Timing Sprocket

gatVCP813
Gates 09-13 Infiniti FX50 V-8 5.0L Exhaust (Right) Engine Variable Valve Timing Sprocket
512,25 € excl. VAT

Variable Valve Timing Sprocket

gatVCP853
Gates 10-12 Toyota Camry 4-Cyl. 2.5L Exhaust Camshaft Engine Variable Valve Timing Sprocket
265,51 € excl. VAT

Variable Valve Timing Sprocket

gatVCP834
Gates 06-08 Volkswagen Jetta 4-Cyl. 2.0L Engine Variable Valve Timing Sprocket
626,52 € excl. VAT

Variable Valve Timing Sprocket

gatVCP867
Gates 08-09 Saturn Astra 4-Cyl. 1.8L Intake Camshaft Engine Variable Valve Timing Sprocket
154,42 € excl. VAT

Variable Valve Timing Sprocket

gatVCP946
Gates 12-15 Toyota Tacoma 4-Cyl. 2.7L Engine Variable Valve Timing Sprocket
339,06 € excl. VAT

Variable Valve Timing Sprocket

gatVCP857
Gates 13-15 Volkswagen Tiguan 4-Cyl. 1.4L (Non-US) Engine Variable Valve Timing Sprocket
665,88 € excl. VAT

Variable Valve Timing Sprocket

gatVCP841
Gates 06-11 Hyundai Accent 4-Cyl. 1.6L Engine Variable Valve Timing Sprocket
574,87 € excl. VAT

Variable Valve Timing Sprocket

gatVCP897
Gates 05-15 Toyota Tacoma V-6 4.0L Engine Variable Valve Timing Sprocket
342,83 € excl. VAT

Variable Valve Timing Sprocket

gatVCP842
Gates 03-12 Hyundai Elantra 4-Cyl. 2.0L Engine Variable Valve Timing Sprocket
350,09 € excl. VAT

Variable Valve Timing Sprocket

gatVCP817
Gates 2012 Nissan Versa 4-Cyl. 1.6L Intake Camshaft Engine Variable Valve Timing Sprocket
366,69 € excl. VAT

Variable Valve Timing Sprocket

gatVCP978
Gates 17-20 Ford Escape 4-Cyl. 2.0L Engine Variable Valve Timing Sprocket - Exhaust Camshaft
150,55 € excl. VAT

Variable Valve Timing Sprocket

gatVCP951
Gates 12-18 Nissan Versa 4-Cyl. 1.6L Exhaust Camshaft Engine Variable Valve Timing Sprocket
576,71 € excl. VAT

Variable Valve Timing Sprocket

gatVCP816
Gates 08-10 Infiniti M45 V-8 4.5L Left Side Camshaft Engine Variable Valve Timing Sprocket
386,03 € excl. VAT

Variable Valve Timing Sprocket

gatVCP831
Gates 07-10 Ford Edge V-6 3.5L Intake (Left) Engine Variable Valve Timing Sprocket
182,68 € excl. VAT

Variable Valve Timing Sprocket

gatVCP804
Gates 09-22 Chevrolet Traverse V-6 3.6L Intake (Right) Engine Variable Valve Timing Sprocket
138,95 € excl. VAT

Variable Valve Timing Sprocket

gatVCP835
Gates 12-16 Mercedes-Benz E350 V-6 3.5L Intake (Left) Engine Variable Valve Timing Sprocket
1.003,76 € excl. VAT

Variable Valve Timing Sprocket

gatVCP874
Gates 09-14 Nissan Cube 4-Cyl. 1.8L Engine Variable Valve Timing Sprocket
587,13 € excl. VAT

Variable Valve Timing Sprocket

gatVCP846
Gates 10-12 Hyundai Santa Fe V-6 3.5L Intake Camshaft Engine Variable Valve Timing Sprocket
288,61 € excl. VAT

Variable Valve Timing Sprocket

gatVCP848
Gates 09-12 Hyundai Genesis V-8 4.6L Intake Camshaft Engine Variable Valve Timing Sprocket
269,36 € excl. VAT

Variable Valve Timing Sprocket

gatVCP824
Gates 2005 Nissan Frontier V-6 4.0L Engine Variable Valve Timing Sprocket
394,42 € excl. VAT

Variable Valve Timing Sprocket

gatVCP844
Gates 11-13 Hyundai Elantra 4-Cyl. 1.8L Intake Camshaft Engine Variable Valve Timing Sprocket
235,81 € excl. VAT

Variable Valve Timing Sprocket

gatVCP809
Gates 2009 Toyota Corolla 4-Cyl. 1.8L Intake Camshaft Engine Variable Valve Timing Sprocket
316,83 € excl. VAT

Variable Valve Timing Sprocket

gatVCP827
Gates 02-06 Honda CR-V 4-Cyl. 2.4L Engine Variable Valve Timing Sprocket
246,06 € excl. VAT