0

Engines & Components

Is your engine stripped down on the bench, or do you just need new valve springs for the cylinder head? In this category we bring together engine parts for projects that demand more than the original parts can handle: pistons, connecting rods, crankshafts, camshafts, bearings, oiling systems and cylinder heads. The parts are aimed at you if you are building for higher boost, more revs or track use.

What the parts in the engine do

An engine consists of systems that have to work together. The rotating assembly – crankshaft, connecting rods and pistons – converts combustion pressure into torque, while the camshaft and valvetrain control when air flows in and out. Bearings and the oiling system keep the moving parts separated by an oil film, and the cylinder head has a major influence on how well the engine breathes. If you increase boost or revs, the load on every part rises, and the weakest link sets the limit. So plan the whole project before you buy individual parts, or take a look at a complete engine kit with rotating assembly.

How to choose pistons and connecting rods

The pistons must match the bore, stroke, rod length and the compression ratio you want. For high-boost engines, lower compression is typically chosen, often via a dish in the piston crown. Also look at the ring pack, wrist pin and any coating. The range includes, for example, Wiseco piston kits and ring sets as well as Manley piston kits for the Chrysler 6.4L Hemi, and JE Pistons and Eagle are also among the brands. The connecting rods must be able to withstand the increased load and have a length that suits the piston and crankshaft – especially in stroker projects where the stroke is changed.

Camshaft and valvetrain must match

A camshaft with more lift and longer duration can move the power band upwards, but the valve springs, retainers and valve locks must be able to keep up. Too little spring pressure can cause valve float at high revs, while unnecessarily high pressure can increase wear on the cam and lifters. So choose based on lift, spring pressure, piston-to-valve clearance and how the engine is used. COMP Cams, for example, offers a beehive spring kit with steel retainers for the Dodge 5.7L Hemi model years 03-08, designed for 0.600 inch lift.

Installation, tolerances and break-in

High-performance engine parts require precise installation. Bearing clearance, piston clearance and ring gap must be measured and adjusted according to the manufacturer's instructions, and the ring gap depends on factors such as bore and application. Check that the parts fit your specific engine and build, including bore, compression height and bearing dimensions. An upgraded oiling system can be relevant at high revs or for track use, where oil pressure can drop in hard corners. After assembly, the engine is typically broken in according to the manufacturer's instructions, and the first oil change is done early to remove wear particles.

Frequently asked questions

Do I need to change pistons if I increase boost?

It depends on the engine, the original pistons and how much the boost is increased. For bigger changes, lower-compression pistons are typically chosen, but the choice should be assessed together with connecting rods, fuel and engine management.

Should the camshaft and valve springs be replaced at the same time?

Often, yes. A camshaft with more lift or a more aggressive profile may require different springs, retainers and valve locks. Check the cam manufacturer's recommended spring pressure and the piston-to-valve clearance before you assemble the engine.

Can I assemble the engine myself with the new parts?

It requires experience, precise measuring tools and the manufacturer's specifications. Bearing clearance, ring gap and torque specs must be checked carefully. If you don't have the equipment, the safest option is to let an engine shop handle the assembly.

Engines & Components
View as Grid List
Sort by
Display per page

Variable Valve Timing Sprocket

gatVCP855
Gates 2007 Chevrolet Silverado V8 6.0L Engine Variable Valve Timing Sprocket
157,06 € excl. VAT

Variable Valve Timing Sprocket

gatVCP877
Gates 2007 Dodge Caliber 4-Cyl. 2.0L Engine Variable Valve Timing Sprocket - Intake Camshaft
158,19 € excl. VAT

Variable Valve Timing Sprocket

gatVCP851
Gates 09-12 Hyundai Genesis V-8 4.6L Exhaust Camshaft Engine Variable Valve Timing Sprocket
281,60 € excl. VAT

Variable Valve Timing Sprocket

gatVCP866
Gates 11-16 Chevrolet Cruze 4-Cyl. 1.8L Exhaust Camshaft Engine Variable Valve Timing Sprocket
143,72 € excl. VAT

Variable Valve Timing Sprocket

gatVCP942
Gates 16-18 Hyundai Tucson 4-Cyl. 1.6L Engine Variable Valve Timing Sprocket - Exhaust Camshaft
179,35 € excl. VAT

Variable Valve Timing Sprocket

gatVCP870
Gates 08-12 Chevrolet Colorado 5-Cyl. 3.7L Engine Variable Valve Timing Sprocket
202,88 € excl. VAT

Variable Valve Timing Sprocket

gatVCP833
Gates 12-16 Mercedes-Benz E350 V-6 3.5L Exhaust (Left) Engine Variable Valve Timing Sprocket
673,99 € excl. VAT

Variable Valve Timing Sprocket

gatVCP821
Gates 03-06 Nissan Sentra 4-Cyl. 1.8L Engine Variable Valve Timing Sprocket
587,56 € excl. VAT

Variable Valve Timing Sprocket

gatVCP950
Gates 04-06 Cadillac CTS V-6 3.6L Engine Variable Valve Timing Sprocket - Intake Camshaft
470,67 € excl. VAT

Variable Valve Timing Sprocket

gatVCP832
Gates 06-07 Chevrolet Trailblazer 6-Cyl. 4.2L Engine Variable Valve Timing Sprocket
178,60 € excl. VAT

Variable Valve Timing Sprocket

gatVCP805
Gates 09-22 Chevrolet Traverse V-6 3.6L Intake (Left) Engine Variable Valve Timing Sprocket
138,95 € excl. VAT

Variable Valve Timing Sprocket

gatVCP829
Gates 04-08 Acura TSX 4-Cyl. 2.4L Engine Variable Valve Timing Sprocket
278,71 € excl. VAT

Variable Valve Timing Sprocket

gatVCP814
Gates 08-10 Infiniti M45 V-8 4.5L Right Side Camshaft Engine Variable Valve Timing Sprocket
386,03 € excl. VAT

Variable Valve Timing Sprocket

gatVCP952
Gates 09-12 Toyota Corolla 4-Cyl. 1.8L Intake Camshaft Engine Variable Valve Timing Sprocket
302,38 € excl. VAT

Variable Valve Timing Sprocket

gatVCP849
Gates 2011 Hyundai Sonata 4-Cyl. 2.4L Exhaust Camshaft Engine Variable Valve Timing Sprocket
287,67 € excl. VAT

Variable Valve Timing Sprocket

gatVCP822
Gates 07-15 Nissan Titan V-8 5.6L Intake (Right) Engine Variable Valve Timing Sprocket
309,26 € excl. VAT

Variable Valve Timing Sprocket

gatVCP871
Gates 2006 Chevrolet Colorado 4-Cyl. 2.8L Engine Variable Valve Timing Sprocket
219,38 € excl. VAT

Variable Valve Timing Sprocket

gatVCP850
Gates 11-13 Kia Sorento V-6 3.5L Exhaust Camshaft Engine Variable Valve Timing Sprocket
194,44 € excl. VAT

Variable Valve Timing Sprocket

gatVCP800
Gates 11-17 Chevrolet Equinox 4-Cyl. 2.4L Engine Variable Valve Timing Sprocket
155,49 € excl. VAT

Variable Valve Timing Sprocket

gatVCP828
Gates 07-18 Toyota Yaris 4-Cyl. 1.5L Engine Variable Valve Timing Sprocket
322,09 € excl. VAT

Variable Valve Timing Sprocket

gatVCP875
Gates 07-16 Mini Cooper 4-Cyl. 1.6L Intake Camshaft Engine Variable Valve Timing Sprocket
564,63 € excl. VAT

Variable Valve Timing Sprocket

gatVCP930
Gates 16-18 Jeep Wrangler V-6 3.6L Engine Variable Valve Timing Sprocket - Exhaust Camshaft
146,91 € excl. VAT

Variable Valve Timing Sprocket

gatVCP953
Gates 12-15 Scion iQ 4-Cyl. 1.3L Intake Camshaft Engine Variable Valve Timing Sprocket
306,15 € excl. VAT

Variable Valve Timing Sprocket

gatVCP825
Gates 06-11 Mercedes-Benz E350 V-6 3.5L Intake (Right) Engine Variable Valve Timing Sprocket
645,37 € excl. VAT