0

Engines & Components

Is your engine stripped down on the bench, or do you just need new valve springs for the cylinder head? In this category we bring together engine parts for projects that demand more than the original parts can handle: pistons, connecting rods, crankshafts, camshafts, bearings, oiling systems and cylinder heads. The parts are aimed at you if you are building for higher boost, more revs or track use.

What the parts in the engine do

An engine consists of systems that have to work together. The rotating assembly – crankshaft, connecting rods and pistons – converts combustion pressure into torque, while the camshaft and valvetrain control when air flows in and out. Bearings and the oiling system keep the moving parts separated by an oil film, and the cylinder head has a major influence on how well the engine breathes. If you increase boost or revs, the load on every part rises, and the weakest link sets the limit. So plan the whole project before you buy individual parts, or take a look at a complete engine kit with rotating assembly.

How to choose pistons and connecting rods

The pistons must match the bore, stroke, rod length and the compression ratio you want. For high-boost engines, lower compression is typically chosen, often via a dish in the piston crown. Also look at the ring pack, wrist pin and any coating. The range includes, for example, Wiseco piston kits and ring sets as well as Manley piston kits for the Chrysler 6.4L Hemi, and JE Pistons and Eagle are also among the brands. The connecting rods must be able to withstand the increased load and have a length that suits the piston and crankshaft – especially in stroker projects where the stroke is changed.

Camshaft and valvetrain must match

A camshaft with more lift and longer duration can move the power band upwards, but the valve springs, retainers and valve locks must be able to keep up. Too little spring pressure can cause valve float at high revs, while unnecessarily high pressure can increase wear on the cam and lifters. So choose based on lift, spring pressure, piston-to-valve clearance and how the engine is used. COMP Cams, for example, offers a beehive spring kit with steel retainers for the Dodge 5.7L Hemi model years 03-08, designed for 0.600 inch lift.

Installation, tolerances and break-in

High-performance engine parts require precise installation. Bearing clearance, piston clearance and ring gap must be measured and adjusted according to the manufacturer's instructions, and the ring gap depends on factors such as bore and application. Check that the parts fit your specific engine and build, including bore, compression height and bearing dimensions. An upgraded oiling system can be relevant at high revs or for track use, where oil pressure can drop in hard corners. After assembly, the engine is typically broken in according to the manufacturer's instructions, and the first oil change is done early to remove wear particles.

Frequently asked questions

Do I need to change pistons if I increase boost?

It depends on the engine, the original pistons and how much the boost is increased. For bigger changes, lower-compression pistons are typically chosen, but the choice should be assessed together with connecting rods, fuel and engine management.

Should the camshaft and valve springs be replaced at the same time?

Often, yes. A camshaft with more lift or a more aggressive profile may require different springs, retainers and valve locks. Check the cam manufacturer's recommended spring pressure and the piston-to-valve clearance before you assemble the engine.

Can I assemble the engine myself with the new parts?

It requires experience, precise measuring tools and the manufacturer's specifications. Bearing clearance, ring gap and torque specs must be checked carefully. If you don't have the equipment, the safest option is to let an engine shop handle the assembly.

Engines & Components
View as Grid List
Sort by
Display per page

Valve-VW IV R/M 48mm

man11658-4
Manley VW Type IV Single Groove 48mm Race Master Intake Valves (Set of 4)
135,24 € excl. VAT

Valve-VW IV R/M 50mm

man11662B-4
Manley Volkswagen 1.7L 50mm Dia 4.606in Length Race Series Intake Valve Kit
137,68 € excl. VAT

Valve-VW R/M 32mm

man11649B-4
Manley Volkswagen 1.2L Type I Exhaust Valve Kit 32.00mm Head Dia. 4.405in O/A Length, 0.3130in Stem
135,24 € excl. VAT

Valve-VW R/M 32mm

man11649-4
Manley VW 1200-1600 Triple Groove 32.0mm Race Master Exhaust Valves (Set of 4)
135,24 € excl. VAT

Valve-VW R/M 33mm

man11651-4
Manley Volkswagen 1.2L Type I Exhaust Valve Kit 33.00mm Head Dia. 4.405in O/A Length, 0.3130in Stem
135,24 € excl. VAT

Valve-VW R/M 33mm

man11651B-4
Manley VW 1200-1600 Single Groove 33mm Race Master Exhaust Valves (Set of 4)
132,15 € excl. VAT

Valve-VW R/M 35.5mm

man11653B-4
Manley VW 1200-1600 Triple Groove 35.5mm Race Master Exhaust Valves (Set of 4)
135,24 € excl. VAT

Valve-VW R/M 37.5mm

man11655-4
Manley VW 1200-1600 Triple Groove 37.5mm Race Master Exhaust Valves (Set of 4)
135,24 € excl. VAT

Valve-VW R/M 37.5mm

man11655B-4
Manley Volkswagen 1.2L Type I Exhaust Valve Kit 37.50mm Head Dia. 4.405in O/A Length, 0.3130in Stem
135,24 € excl. VAT

Valve-VW R/M 40mm

man11650B-4
Manley VW 1200-1600 Triple Groove 40mm Race Master Exhaust Valves (Set of 4)
135,24 € excl. VAT

Valve-VW R/M 40mm

man11650-4
Manley VW 1200-1600 Triple Groove 40.0mm Race Master Intake Valves (Set of 4)
135,24 € excl. VAT

Valve-VW R/M 42mm

man11652-4
Manley VW 1200-1600 Triple Groove 42mm Race Master Exhaust Valves (Set of 4)
135,24 € excl. VAT

Valve-VW R/M 42mm

man11652B-4
Manley Volkswagen 1.2L Type I Intake Valve Kit - 42.00mm Head Dia. 4.405in O/A Length, 0.3130in Stem
135,24 € excl. VAT

Valve-VW R/M 43.7mm

man11654-4
Manley VW 1200-1600 Triple Groove 43.7mm Race Master Intake Valves (Set of 4)
135,24 € excl. VAT

Valve-VW R/M 43.7mm

man11654B-4
Manley Volkswagen 1.2L Type I Intake Valve Kit - 43.70mm Head Dia. 4.405in O/A Length, 0.3130in Stem
135,24 € excl. VAT

Valve-VW RAB R/M 34mm

man11657-4
Manley Volkswagen Rabbit Exhaust Valve Kit - 34.00mm Head Dia. 3.976in O/A Length, 0.3130in Stem
135,24 € excl. VAT

Valve-VW RAB R/M 40.5mm

man11656-4
Manley VW Rabbit Stainless 40.5mm Race Master Intake Valves (Set of 4)
135,24 € excl. VAT

Variable Valve Timing Solenoid

gatVVS268
Gates 10-12 Hyundai Genesis V-6 3.8L Exhaust (Right) Engine Variable Valve Timing Solenoid
159,80 € excl. VAT

Variable Valve Timing Solenoid

gatVVS184
Gates 06-09 Hyundai Santa Fe V-6 2.7L Left Side Engine Variable Valve Timing Solenoid
122,42 € excl. VAT

Variable Valve Timing Solenoid

gatVVS322
Gates 05-07 Honda Odyssey V-6 3.5L Engine Variable Valve Timing Solenoid
496,81 € excl. VAT

Variable Valve Timing Solenoid

gatVVS178
Gates 20-24 Hyundai Palisade V-6 3.8L Exhaust (Left) Engine Variable Valve Timing Solenoid
148,63 € excl. VAT

Variable Valve Timing Solenoid

gatVVS388
Gates 12-16 BMW 328I 4-Cyl. 2.0L Engine Variable Valve Timing Solenoid
190,67 € excl. VAT

Variable Valve Timing Solenoid

gatVVS229
Gates 18-24 BMW X3 4-Cyl. 2.0L Engine Variable Valve Timing Solenoid
74,02 € excl. VAT

Variable Valve Timing Solenoid

gatVVS124
Gates 05-09 Toyota Tundra V-8 4.7L Left Side Engine Variable Valve Timing Solenoid
138,87 € excl. VAT