0

Engines & Components

Is your engine stripped down on the bench, or do you just need new valve springs for the cylinder head? In this category we bring together engine parts for projects that demand more than the original parts can handle: pistons, connecting rods, crankshafts, camshafts, bearings, oiling systems and cylinder heads. The parts are aimed at you if you are building for higher boost, more revs or track use.

What the parts in the engine do

An engine consists of systems that have to work together. The rotating assembly – crankshaft, connecting rods and pistons – converts combustion pressure into torque, while the camshaft and valvetrain control when air flows in and out. Bearings and the oiling system keep the moving parts separated by an oil film, and the cylinder head has a major influence on how well the engine breathes. If you increase boost or revs, the load on every part rises, and the weakest link sets the limit. So plan the whole project before you buy individual parts, or take a look at a complete engine kit with rotating assembly.

How to choose pistons and connecting rods

The pistons must match the bore, stroke, rod length and the compression ratio you want. For high-boost engines, lower compression is typically chosen, often via a dish in the piston crown. Also look at the ring pack, wrist pin and any coating. The range includes, for example, Wiseco piston kits and ring sets as well as Manley piston kits for the Chrysler 6.4L Hemi, and JE Pistons and Eagle are also among the brands. The connecting rods must be able to withstand the increased load and have a length that suits the piston and crankshaft – especially in stroker projects where the stroke is changed.

Camshaft and valvetrain must match

A camshaft with more lift and longer duration can move the power band upwards, but the valve springs, retainers and valve locks must be able to keep up. Too little spring pressure can cause valve float at high revs, while unnecessarily high pressure can increase wear on the cam and lifters. So choose based on lift, spring pressure, piston-to-valve clearance and how the engine is used. COMP Cams, for example, offers a beehive spring kit with steel retainers for the Dodge 5.7L Hemi model years 03-08, designed for 0.600 inch lift.

Installation, tolerances and break-in

High-performance engine parts require precise installation. Bearing clearance, piston clearance and ring gap must be measured and adjusted according to the manufacturer's instructions, and the ring gap depends on factors such as bore and application. Check that the parts fit your specific engine and build, including bore, compression height and bearing dimensions. An upgraded oiling system can be relevant at high revs or for track use, where oil pressure can drop in hard corners. After assembly, the engine is typically broken in according to the manufacturer's instructions, and the first oil change is done early to remove wear particles.

Frequently asked questions

Do I need to change pistons if I increase boost?

It depends on the engine, the original pistons and how much the boost is increased. For bigger changes, lower-compression pistons are typically chosen, but the choice should be assessed together with connecting rods, fuel and engine management.

Should the camshaft and valve springs be replaced at the same time?

Often, yes. A camshaft with more lift or a more aggressive profile may require different springs, retainers and valve locks. Check the cam manufacturer's recommended spring pressure and the piston-to-valve clearance before you assemble the engine.

Can I assemble the engine myself with the new parts?

It requires experience, precise measuring tools and the manufacturer's specifications. Bearing clearance, ring gap and torque specs must be checked carefully. If you don't have the equipment, the safest option is to let an engine shop handle the assembly.

Engines & Components
View as Grid List
Sort by
Display per page

Valve-TI SmallBlock 1.625

man11453HTB-8
Manley Titanium Exhaust Valve Kit - Small Block GM, Ford, Chrysler
1.542,70 € excl. VAT

Valve-TI SmallBlock 1.625

man11437TB-8
Manley Titanium Exhaust Valve Kit - Small Block GM, Ford, Chrysler
1.481,26 € excl. VAT

Valve-TI SR 20? 2.400, 6.035, .3415, B/L

man12210HTB-1
Manley Brodix Big Block SR20 Titanium Intake Valve 2.400in Head Dia 6.035 Length
233,76 € excl. VAT

Valve-TOYOTA 3UR-FE R/M 32.5mm

man12367-8
Manley Toyota 5.7L 3UR-FE Exhaust Valve Kit - 32.50mm Head Dia. 110.62mmmm O/A Length, 0.2155in Stem
248,80 € excl. VAT

Valve-TOYOTA 3UR-FE R/M 32mm

man12365-8
Manley Toyota 5.7L 3UR-FE Exhaust Valve Kit - 32.00mm Head Dia. 110.62mmmm O/A Length, 0.2155in Stem
248,80 € excl. VAT

Valve-TOYOTA 3UR-FE R/M 38.5mm

man12366-8
Manley Toyota 5.7L 3UR-FE intake Valve Kit - 38.50mm Head Dia. 106.05mm O/A Length, 0.2155in Stem
248,80 € excl. VAT

Valve-TOYOTA 3UR-FE R/M 38mm

man12364-8
Manley Toyota 5.7L 3UR-FE intake Valve Kit - 38.00mm Head Dia. 106.05mm O/A Length, 0.2155in Stem
248,80 € excl. VAT

Valvetrain Kit - M-6505-CJ52

frpM-6505-CJ52
Ford Racing 2018 Cobra Jet 5.2L Titanium Valve Train Kit
4.136,95 € excl. VAT

Valvetrain Kit - M-6505-FP350S

frpM-6505-FP350S
Ford Racing 5.2L Cylinder Head Valve Train Kit
2.438,50 € excl. VAT

Valve-VIPER R/M 1.580

man11641-10
Manley Dodge Viper V-10 1.580 Dia Race Master Exhaust Valves (Set of 10)
314,57 € excl. VAT

Valve-VIPER R/M 1.600

man11643-1
Manley 99-10 Dodge Viper 1.600in Diameter 5.770in Length Race Master Exhaust Valve (Single)
39,26 € excl. VAT

Valve-VIPER R/M 1.600,+.100

man11645-10
Manley up to 2010 Dodge Viper V-10 1.600 Dia .100 Longer Race Master Intake Valves (Set of 10)
319,20 € excl. VAT

Valve-VIPER R/M 1.600,+.200

man11647-10
Manley Dodge 8.0L Viper V10 Exhaust Valve Kit - 1.600in Head Dia. 5.97mm O/A Length, 0.3110in Stem
319,20 € excl. VAT

Valve-VIPER R/M 1.920

man11642-1
Manley Dodge Viper V-10 1.920 Dia Race Master Intake Valve (Single)
39,26 € excl. VAT

Valve-VIPER R/M 1.920

man11642-10
Manley Dodge Viper V-10 1.920 Dia Race Master Intake Valves (Set of 10)
319,20 € excl. VAT

Valve-VIPER R/M 2.020

man11644-1
Manley 99-10 Dodge Viper 2.020in Diameter 5.728in Length Race Master Exhaust Valve (Single)
39,26 € excl. VAT

Valve-VIPER R/M 2.020,+.100

man11646-10
Manley up to 2010 Dodge Viper V-10 2.020 Dia .100 Longer Race Master Intake Valves (Set of 10)
319,20 € excl. VAT

Valve-VIPER R/M 2.055,+.100

man11660-10
Manley thru 2010 Dodge Viper V-10 Race Master Intake Valves (Set of 10)
317,17 € excl. VAT

Valve-VW IV R/M 36mm

man11629-4
Manley Volkswagen 1.7L Type IV Exhaust Valve Kit - 36.00mm Head Dia. 4.606in O/A Length, 0.3130in
135,24 € excl. VAT

Valve-VW IV R/M 38mm

man11659B-4
Manley Volkswagen 1.7L Type IV Exhaust Valve Kit - 38.00mm Head Dia. 4.606in O/A Length, 0.3130in
135,24 € excl. VAT

Valve-VW IV R/M 38mm

man11659-4
Manley VW Type IV Single Groove 38mm Race Master Exhaust Valves (Set of 4)
135,24 € excl. VAT

Valve-VW IV R/M 40mm

man11663-4
Manley Volkswagen 1.7L Type IV Exhaust Valve Kit - 40.00mm Head Dia. 4.606in O/A Length, 0.3130in
135,24 € excl. VAT

Valve-VW IV R/M 40mm

man11663B-4
Manley Volkswagen 1.7L 40mm Dia 4.606in Length Race Series Exhaust Valve Kit
137,68 € excl. VAT

Valve-VW IV R/M 42mm

man11628-4
Manley Porsche 914 2.0L 42mm Head Diameter Triple Groove Race Master Intake Valves (Set of 4)
135,24 € excl. VAT