0

Transmission & Drivetrain

Is your clutch slipping now that the engine makes more power, or do you need to put the power down to the wheels more effectively? The drivetrain is everything that transfers the engine's power: clutch and flywheel, gearbox, driveshaft or chain and sprockets, differential, transfer case, bearings and shifter. This category is for you if you maintain, upgrade or build a project for road or track.

The entire drivetrain has to keep up

Every part of the drivetrain must be able to handle the torque the engine delivers. If you increase power with higher boost or other tuning, the clutch is typically the first thing to start slipping, but the gearbox, axles and differential are also put under more load. So look at the whole chain of parts when planning a project, so the weakest link doesn't hold back the rest.

How to choose a clutch and flywheel

Among clutches and flywheels, the torque rating of the clutch is the first criterion, but how you use the car matters just as much. In this category you'll find brands such as SPEC, Action Clutch, Clutch Masters and ACT, with ACT, for example, offering race discs with both 4 and 6 pucks in sprung and rigid versions. Consider in particular:

  • Friction material and number of pucks: fewer pucks typically give a more aggressive engagement, which can make pulling away less smooth.
  • Sprung or rigid disc: springs in the hub dampen vibrations; a rigid disc is simpler but can cause more noise and driveline shock.
  • Flywheel: a lighter flywheel can let the engine rev up faster, but can make the car more demanding in city traffic.

Chains, shafts, differentials and shifters

Under driveshafts, chains and couplers you'll find chain and sprocket kits, among other things, e.g. from Vortex Racing. Here the chain pitch (e.g. 525 or 530), number of links and tooth count must match the vehicle. Changing the tooth count changes the gearing and therefore acceleration and top speed. A limited-slip differential can improve traction out of corners, but the type determines how the car behaves and which oil is required. A short shifter can give shorter throws between gears, depending on the gearbox.

Installation and maintenance

Fitment depends on car model, model year, engine and gearbox, so check the part number against your car. It's a good idea to replace the release bearing and pilot bearing at the same time as the clutch, and have the flywheel inspected. Chains must be lubricated and tensioned according to the manufacturer's instructions. A rumbling or humming noise that follows road speed can be caused by worn wheel bearings and seals.

Frequently asked questions

What is the difference between a sprung and a rigid clutch disc?

A sprung disc has springs in the hub that dampen vibrations and shocks in the drivetrain, and is typically more comfortable on the road. A rigid disc is simpler and lighter, but can cause more noise and a harsher engagement.

How do I know if my clutch needs replacing?

Typical signs are revs rising without the car accelerating accordingly, a smell of burnt friction material, or the clutch biting very high in the pedal travel. Judder when pulling away can also be caused by a worn flywheel.

Should the chain and sprockets be replaced at the same time?

This is typically recommended, because a new chain on worn sprockets, or vice versa, wears faster. Check the chain pitch, number of links and tooth count so the kit fits your vehicle.

Do drivetrain modifications require approval for road use?

It depends on the product and the car. Changed gearing or a different gearbox can, for example, affect the speedometer reading. Always check the requirements and documentation for the specific part number before fitting the part to a car used on the road.

Transmission & Drivetrain
View as Grid List
Sort by
Display per page

ACT Perf Street Sprung Disc

act3000909
ACT 1998 Chevrolet Camaro Perf Street Sprung Disc
274,97 € excl. VAT

ACT Perf Street Sprung Disc

act3001605
ACT 2010 Hyundai Genesis Coupe Perf Street Sprung Disc
229,70 € excl. VAT

ACT Perf Street Sprung Disc

act3000215
ACT 07-11 Mazdaspeed 3 Performance Street Sprung Disc
211,64 € excl. VAT

ACT Perf Street Sprung Disc

act3000818
ACT 08-13 BMW 128i (E82/E88) L6-3.0L (N51/N52) Perf Street Sprung Disc
237,71 € excl. VAT

ACT Pilot Bushing

actPB1008
ACT 90-01 Honda Accord/Prelude Pilot Bearing
12,02 € excl. VAT

ACT Release Bearing

actRB803
ACT 1992 Volkswagen Corrado Release Bearing
77,24 € excl. VAT

ACT Release Bearing

actRB833
ACT 1994 Subaru Impreza Release Bearing
72,63 € excl. VAT

ACT Release Bearing

actRB840
ACT 1991 Geo Prizm Release Bearing
68,86 € excl. VAT

ACT Release Bearing

actRB084
ACT 2006 Scion tC Release Bearing
79,58 € excl. VAT

ACT Release Bearing

actRBDN1
ACT 2003 Dodge Neon Release Bearing
93,10 € excl. VAT

ACT Release Bearing

actRB602
ACT 2008 Mitsubishi Lancer Release Bearing
181,57 € excl. VAT

ACT Release Bearing

actRB810
ACT 1991 Nissan 240SX Release Bearing
64,22 € excl. VAT

ACT Release Bearing

actRB172
ACT 1999 BMW 323i Release Bearing
105,66 € excl. VAT

ACT Release Bearing

actRB210
ACT 1992 Plymouth Colt Release Bearing
42,43 € excl. VAT

ACT Release Bearing

actRB130
ACT 2003 Nissan 350Z Release Bearing
81,53 € excl. VAT

ACT Release Bearing

actRB219
ACT 1988 Toyota Camry Release Bearing
87,64 € excl. VAT

ACT Release Bearing

actRB3743A
ACT 2002 Audi TT Quattro Release Bearing
216,51 € excl. VAT

ACT Release Bearing

actRB433
ACT 1995 Nissan 200SX Release Bearing
61,46 € excl. VAT

ACT Release Bearing

actRB105
ACT 2000 Honda S2000 Release Bearing
151,09 € excl. VAT

ACT Release Bearing

actRB443
ACT 1988 Toyota Supra Release Bearing
65,22 € excl. VAT

ACT Release Bearing

actRB091
ACT 1996 Kia Sephia Release Bearing
61,19 € excl. VAT

ACT Replacement Cover Assembly

act812378P
ACT Replacement Cover Assembly
522,24 € excl. VAT

ACT Replacement Diaphragm

act832380P
ACT Replacement Diaphragm
145,89 € excl. VAT