0

Suspension Bushings

Worn bushings in control arms and anti-roll bars can cause clunking over bumps, play in the steering and uneven tyre wear. Here we collect suspension bushing kits – for you who want to restore the precision of a worn car or give a project firmer, more direct handling.

How to choose suspension bushings

The bushings sit between the control arms, anti-roll bars or rear axle mounts and the body, and determine how much the parts can move. If you replace the original rubber bushings with a harder material, steering can typically become more precise and wheel alignment more stable under load. On the other hand, more vibration and road noise can reach the cabin. How much depends on material, hardness and mounting location.

  • Mounting location: Control arm, anti-roll bar and rear bushings affect the car differently. For example, there are kits for the front lower inner control arm on the Audi Q5 from SuperPro and anti-roll bar bushings for the Corvette from Prothane.
  • Dimensions: Anti-roll bar bushings must match the bar diameter, e.g. 28.6 mm.
  • Material: Some kits are available in Delrin or aluminium, which typically allow even less movement than polyurethane but can also produce more noise.
  • Car model: Kits are often built for specific models and model years, e.g. Camaro, Challenger or Jimny.

In addition to SuperPro and Prothane, the category includes Energy Suspension, Whiteline and Fabtech, among others. Installation often requires pressing out the old bushings and having the wheel alignment measured afterwards. If you want to tighten up the entire chassis, you can combine them with strut top mounts and body and subframe bushings.

Frequently asked questions

Will the car ride harder with polyurethane bushings?

It can. Harder bushings typically transmit more vibration and road noise, while the ride comfort itself is mainly governed by springs and shock absorbers. How noticeable the difference is depends on material, hardness and which bushings you replace.

Why do new bushings squeak after installation?

Squeaking is often caused by missing or incorrect lubrication between the bushing and the sleeve or bar. Many polyurethane bushings are supplied with special grease that must be applied during installation. Use the type of grease the manufacturer recommends, as other grease can degrade some materials.

Can my car pass inspection with new suspension bushings?

That depends on the product and the car. Bushings that change wheel alignment or geometry may require a special assessment. Check the approval for the specific part number, and have the wheel alignment measured after installation.

View as Grid List
Sort by
Display per page

Sway Bar Bushing Kit - 3.5109G

eng3.5109G
Energy Suspension 67-81 Camaro Black 3/4 inch Bar One Bolt Clamp Style Rear Sway Bar Bushing Set
57,18 € excl. VAT

Sway Bar Bushing Kit - 3.5118G

eng3.5118G
Energy Suspension 81-91 Denali XL/Suburban 4WD Black 1-1/4in OD Front Sway Bar Bushing Set
36,27 € excl. VAT

Sway Bar Bushing Kit - 3.5126R

eng3.5126R
Energy Suspension 82-04 GM Blazer / S-10/15 Pickup Red Front Sway Bar Bushing Set (End Links Inc)
61,72 € excl. VAT

Sway Bar Bushing Kit - 3.5136R

eng3.5136R
Energy Suspension GM 4 X Front Stab Bar Bushing - Red
52,75 € excl. VAT

Sway Bar Bushing Kit - 3.5141R

eng3.5141R
Energy Suspension 88-96 Chevy Corvette Red 24mm Front Sway Bar Bushing Set (End Links Inc)
43,48 € excl. VAT

Sway Bar Bushing Kit - 3.5146R

eng3.5146R
Energy Suspension 82-02 Chevrolet Camaro Red 23mm Complete Rear Sway Bar Bushing Set
59,15 € excl. VAT