0

Pistons & Piston Rings

Do your cylinders need to be bored out, or does your engine need to handle more boost than it did from the factory? This category brings together pistons, piston sets, piston rings, wrist pins and circlips for rebuilding and building engines – for you who assemble the engine yourself or are planning a bigger project.

Pistons, rings and pins work together

The piston transfers combustion pressure via the wrist pin to the connecting rod, while the piston rings seal against the cylinder wall and control the oil. Circlips hold the pin in place in the piston. You can choose complete piston sets or individual parts such as piston rings and wrist pins. If the bottom end also needs strengthening, connecting rods and bearings are typically part of the same project.

How to choose pistons and piston rings

Start with the engine's dimensions and purpose, then choose based on these criteria:

  • Bore and oversize: The piston must match the cylinder's finished size. The range includes, for example, standard size and oversizes such as .020 and .040 inch, and the final size depends on how the block is machined.
  • Compression and crown shape: Crown volume (e.g. -14cc or -21cc) and compression ratio affect how much boost and which fuel the engine can run. Valve reliefs may be necessary if you switch to a different camshaft.
  • Ring pack: Ring heights such as 1.0 x 1.0 x 2.0 mm or 1.2 x 1.5 x 2.0 mm must match the piston's ring grooves.
  • Coating: Some pistons have a coated crown or skirt, which can reduce friction and wear – the effect depends on the product.

In this category you will find Wiseco, JE Pistons, CP Pistons, Mahle and Mahle OE, among others, e.g. Mahle pistons for Dodge 12V and 24V diesel engines. Check piston-to-wall clearance, ring end gap and ring orientation according to the manufacturer's instructions before assembling the engine, and follow the recommended break-in procedure.

Frequently asked questions

Should I use standard size or oversize?

It depends on the cylinder's dimensions after measuring. If the cylinder is worn or scored, it is typically bored out, and the piston is chosen to match the finished size. Have an engine machine shop measure the block before you order.

Can I reuse the old piston rings?

This is typically not recommended. The rings wear in against the cylinder wall, and new rings normally give the best seal. If you replace the pistons or hone the cylinders, the rings should also be replaced.

Why is the ring end gap important?

The rings expand when they get hot. If the gap is too small, the ends can butt together and damage the piston and cylinder. The correct gap depends on bore, use and boost – follow the ring manufacturer's instructions.

Should wrist pins and circlips be replaced along with the pistons?

Piston sets often include pins and clips, but it depends on the product. Circlips should typically always be new, as they can lose tension when removed.

View as Grid List
Sort by
Display per page

CHEVY FULL ROUND +12.3 4040A

wis6384RA4
Wiseco Chevy FULL ROUND +12.3 4040A Piston Shelf Stock
138,24 € excl. VAT

CHEVY FULL ROUND +12.3 4040A

wis6384LA4
Wiseco Chevy FULL ROUND +12.3 4040A Piston Shelf Stock
138,24 € excl. VAT

Chevy LS +9cc Dome 1.311 x 4.00

wisK0044XS
Wiseco Chevy LSX Junkyard Dog 6.0L +9cc Dome 4.00 Bore .945in Pin NA/Boost/Nitrous Drop-In Pistons
1.271,18 € excl. VAT

Chevy LS +9cc Dome 1.311 x 4.030

wisK0044X3
Wiseco Chevy LS Series +9cc Dome 11.3:1CR 4.03in Bore 3.622in Stroke 6.098in Rod Shelf Piston Kit
1.262,67 € excl. VAT

Chevy LS +9cc Dome 1.311 x 4.035

wisK0044X35
Wiseco Chevy LS 4.035in Bore 1.311in CH 9.00 CC Piston Set
1.264,34 € excl. VAT

Chevy LS -18cc R/Dome 1.110 x 4.125

wisK446X125
Wiseco Chevy LS Series -18cc R/Dome 4.125inch Bore Piston Shelf Stock Kit
1.286,19 € excl. VAT

Chevy LS -18cc R/Dome 1.110 x 4.130

wisK446X130
Wiseco Chevy LS Series -18cc R/Dome 4.130inch Bore Piston Shelf Stock Kit
1.295,92 € excl. VAT

Chevy LS -18cc R/Dome 1.110 x 4.135

wisK446X135
Wiseco Chevy LS Series -18cc R/Dome 4.135inch Bore Piston Shelf Stock Kit
1.286,19 € excl. VAT

Chevy LS -18cc R/Dome 1.110 x 4.155

wisK446X155
Wiseco Chevy LS Series -18cc R/Dome 4.155inch Bore Piston Shelf Stock Kit
1.286,19 € excl. VAT

Chevy LS -23cc R/Dome 1.140 x 4.125

wisK443X125
Wiseco Chevy LS Series -23cc R/Dome 4.125inch Bore Piston Shelf Stock Kit
1.286,19 € excl. VAT

Chevy LS -23cc R/Dome 1.140 x 4.155

wisK443X155
Wiseco Chevy LS Series -23cc R/Dome 4.155inch Bore Piston Shelf Stock Kit
1.286,19 € excl. VAT

Chevy LS -23cc R/Dome 1.140 x 4.200

wisK443X200
Wiseco Chevy LS Series -23cc R/Dome 4.200inch Bore Piston Shelf Stock Kit
1.238,44 € excl. VAT

Chevy LS -3.2cc FT 1.304 x 3.903

wisK398X3903
Wiseco Chevy LS Series -3.2cc FT 3.903inch Bore Piston Shelf Stock Kit
1.122,01 € excl. VAT

Chevy LS -3.2cc FT 1.304 x 3.905

wisK398X3905
Wiseco Chevy LS Series -3.2cc FT 3.905inch Bore Piston Shelf Stock Kit
1.112,20 € excl. VAT

Chevy LS -3.2cc FT 1.304 x 4.000

wisK398XS
Wiseco Chevy LS Series -3.2cc FT 4.000inch Bore Piston Shelf Stock Kit
1.124,91 € excl. VAT

Chevy LS -3.2cc FT 1.304 x 4.065

wisK398X65
Wiseco Chevy LS 4.065in Bore 1.304in CH -3.2 CC 0.927in Pin Piston Shelf Stock Kit - Set of 8
1.129,45 € excl. VAT

Chevy LS -3.2cc FT 1.304 x 4.075

wisK398X75
Wiseco Chevy LS Series -3.2cc FT 4.075inch Bore Piston Shelf Stock Kit - Set of 8
1.127,77 € excl. VAT

Chevy LS -3.2cc FT 1.304 x 4.080

wisK398X8
Wiseco Chevy LS Series -3.2cc FT 4.080inch Bore Piston Shelf Stock Kit - Set of 8
1.127,77 € excl. VAT

Chevy LS 3.900 STROKER WITH .927 PIN

wis60421X3
Wiseco Chevy LS 4.030in Bore 3.900 Stroker .927 Pin Piston Shelf Stock - Single
187,77 € excl. VAT