0

Pistons & Piston Rings

Do your cylinders need to be bored out, or does your engine need to handle more boost than it did from the factory? This category brings together pistons, piston sets, piston rings, wrist pins and circlips for rebuilding and building engines – for you who assemble the engine yourself or are planning a bigger project.

Pistons, rings and pins work together

The piston transfers combustion pressure via the wrist pin to the connecting rod, while the piston rings seal against the cylinder wall and control the oil. Circlips hold the pin in place in the piston. You can choose complete piston sets or individual parts such as piston rings and wrist pins. If the bottom end also needs strengthening, connecting rods and bearings are typically part of the same project.

How to choose pistons and piston rings

Start with the engine's dimensions and purpose, then choose based on these criteria:

  • Bore and oversize: The piston must match the cylinder's finished size. The range includes, for example, standard size and oversizes such as .020 and .040 inch, and the final size depends on how the block is machined.
  • Compression and crown shape: Crown volume (e.g. -14cc or -21cc) and compression ratio affect how much boost and which fuel the engine can run. Valve reliefs may be necessary if you switch to a different camshaft.
  • Ring pack: Ring heights such as 1.0 x 1.0 x 2.0 mm or 1.2 x 1.5 x 2.0 mm must match the piston's ring grooves.
  • Coating: Some pistons have a coated crown or skirt, which can reduce friction and wear – the effect depends on the product.

In this category you will find Wiseco, JE Pistons, CP Pistons, Mahle and Mahle OE, among others, e.g. Mahle pistons for Dodge 12V and 24V diesel engines. Check piston-to-wall clearance, ring end gap and ring orientation according to the manufacturer's instructions before assembling the engine, and follow the recommended break-in procedure.

Frequently asked questions

Should I use standard size or oversize?

It depends on the cylinder's dimensions after measuring. If the cylinder is worn or scored, it is typically bored out, and the piston is chosen to match the finished size. Have an engine machine shop measure the block before you order.

Can I reuse the old piston rings?

This is typically not recommended. The rings wear in against the cylinder wall, and new rings normally give the best seal. If you replace the pistons or hone the cylinders, the rings should also be replaced.

Why is the ring end gap important?

The rings expand when they get hot. If the gap is too small, the ends can butt together and damage the piston and cylinder. The correct gap depends on bore, use and boost – follow the ring manufacturer's instructions.

Should wrist pins and circlips be replaced along with the pistons?

Piston sets often include pins and clips, but it depends on the product. Circlips should typically always be new, as they can lose tension when removed.

View as Grid List
Sort by
Display per page

Suzuki DR350 '90-99 10.5:1 CR 3110XG

wis4576M07900
Wiseco Suzuki DR350 90-99 10.51 CR 3110XG Piston kit
219,83 € excl. VAT

Suzuki DR350 '90-99 10.5:1 CR 3150XG

wis4576M08000
Wiseco Suzuki DR350 90-99 10.51 CR 3150XG Piston kit
219,83 € excl. VAT

Suzuki DR350 '90-99 10.5:1 CR 3189XG

wis4576M08100
Wiseco Suzuki DR350 90-99 10.51 CR 3189XG Piston kit
243,30 € excl. VAT

Suzuki DR350 '90-99 10.5:1 CR 3228XG

wis4576M08200
Wiseco Suzuki DR350 90-99 10.51 CR 3228XG Piston kit
243,45 € excl. VAT

Suzuki DR350 '90-99 10.5:1 CR 3268XG

wis4576M08300
Wiseco Suzuki DR350 90-99 10.51 CR 3268XG Piston kit
243,95 € excl. VAT

Suzuki G13B -8cc 1.114 x 2.9528 Dish

wisKE247M75
Wiseco Suzuki G13B 1.3L 16V Swift GTI Pistons - Set of 4
958,36 € excl. VAT

Suzuki GS1000 '78-81 2v 10.25:1 CR

wis4064M07300
Wiseco Suzuki GS1000 78-81 2v 10.251 CR Piston Kit
240,88 € excl. VAT

Suzuki GS1000 '78-81 2v 10.25:1 CR

wisK1085
Wiseco 78-81 Suzuki GS1000 2v 10.251 CR Piston Kit
1.011,17 € excl. VAT

Suzuki GS1000 '78-81 2v 10.25:1 CR

wisK1100
Wiseco 78-81 Suzuki GS1000 2v 10.251 CR Piston Kit
1.011,76 € excl. VAT

Suzuki GS1000 '78-81 2v 10.25:1 CR

wis4066M07350
Wiseco Suzuki GS1000 78-81 2v 10.251 CR Piston Kit
241,01 € excl. VAT