0

Hoses & Lines

Fuel, oil, charge air or brake fluid – what needs to flow through your project, and at what pressure and temperature? In this category we bring together hoses, tubing and hose ends for the engine, fuel system, cooling, intake and brakes, so you can build up the lines to suit your exact car and purpose.

Hoses and tubing for every system

Silicone hoses are typically used for coolant and charge air, e.g. between turbo, intercooler and intake, as they typically withstand heat and hold their shape under boost pressure. For fuel and oil you can choose between braided hoses and PTFE hoses, where a PTFE core typically handles modern fuels and ethanol blends better than rubber. Vibrant, for example, offers universal aluminium tubing in several diameters and bends that can be used for charge pipes or intake, while vacuum hoses cover negative-pressure lines.

How to choose hose and hose ends

Start with the fluid, pressure and temperature, then choose size and connection:

  • Medium: fuel, oil, coolant, air and brake fluid place different demands on the hose core.
  • Diameter and AN size: must match the flow requirement and the hose ends and fittings you use.
  • Pressure and temperature: check the data for the specific part number.
  • Hose end: PTFE hoses typically require hose ends made for PTFE, e.g. Aeromotive PTFE hose ends in AN-08 and AN-12.
  • Space and routing: bend radius, distance to hot parts and angled ends, e.g. 90 degrees, determine how the hose can be routed.

Russell, for example, offers both standard hoses and nitrous hoses, and among the brands you will also find Gates, DFC and Fragola.

Brake hoses, installation and maintenance

Stainless braided brake hoses can give a firmer pedal because they typically expand less under pressure than rubber hoses. Extended kits are also available, e.g. from ICON for the Ford F-250/F-350 from 2017, where the length must suit the vehicle's suspension. Whether a brake hose is approved for road use depends on the product and the car, so check the approval for the specific part number. Tighten hose ends according to the manufacturer's instructions, secure the hoses with clamps and brackets, and regularly check for chafing, cracks and leaks.

Frequently asked questions

What is the difference between braided hoses and PTFE hoses?

Both are typically available with braided outer protection, but the core is different. A PTFE core is typically more resistant to modern fuels and ethanol, while rubber cores can be more flexible. Choose based on medium, pressure, temperature and hose ends.

Can I use standard hose ends on PTFE hoses?

Typically not. PTFE hoses often require hose ends designed for PTFE, where an olive clamps around the core. Always check that the hose end and hose are made for each other and that the AN size matches.

Can stainless braided brake hoses pass inspection?

It depends on the product and the car. Check the approval, e.g. E-mark, for the specific part number before fitting the hoses to a registered car, and consider asking the inspection centre in advance.

View as Grid List
Sort by
Display per page

LINE RTNER

rad20-0626
Radium Engineering Nissan S13/S14/S15/R32/R33/R34 Fuel / Brake Line Retainer Kit
270,31 € excl. VAT

Lines & Fittings

dwk6-02-0851
DeatschWerks 6AN Female Swivel 45-Degree Hose End PTFE (Incl. 1 Olive Insert)
37,86 € excl. VAT

Lines & Fittings

dwk6-02-0864-3
DeatschWerks 6AN Black Nylon Braided PTFE Hose 3 Feet
43,05 € excl. VAT

Lines & Fittings

dwk6-02-0861-20
DeatschWerks 6AN SS Double Braided PTFE Hose 20 Feet
173,42 € excl. VAT

Lines & Fittings

dwk6-02-0816-20
DeatschWerks 8AN Black Nylon Braided CPE Hose 20 Feet
190,83 € excl. VAT

Lines & Fittings

dwk6-02-0853
DeatschWerks 6AN Female Swivel 180-Degree Hose End PTFE (Incl. 1 Olive Insert)
38,57 € excl. VAT

Lines & Fittings

dwk6-02-0865-20
DeatschWerks 8AN Black Nylon Braided PTFE Hose 20 Feet
247,08 € excl. VAT

Lines & Fittings

dwk6-02-0854
DeatschWerks 8AN Female Swivel Straight Hose End PTFE (Incl. 1 Olive Insert)
23,16 € excl. VAT

Lines & Fittings

dwk6-02-0862-20
DeatschWerks 8AN SS Double Braided PTFE Hose 20 Feet
210,27 € excl. VAT

Magnum FORCE Replacement Coupling Kit

afe59-00045
aFe Magnum FORCE Silicone Replacement Coupling Kit 3.5in ID x 3in Length Straight Coupler w/ Hump
37,56 € excl. VAT

Mishimoto MMBK-F2D-08HL

misMMBK-F2D-08HL
Mishimoto 08-10 Ford 6.4L Powerstroke Factory Fit Boot - Hot Side Lower Boot
142,21 € excl. VAT

Mishimoto MMBK-F2D-08HU

misMMBK-F2D-08HU
Mishimoto 08-10 Ford 6.4L Powerstroke Factory Fit Boot - Hot Side Upper Boot
78,90 € excl. VAT

Mishimoto MMBK-RAM-19

misMMBK-RAM-19
Mishimoto 2019+ RAM Cummins 6.7L Factory-Fit Boot Kit
349,23 € excl. VAT

Mishimoto MMCP-2.5HPBK

misMMCP-2.5HPBK
Mishimoto 2.5in Black Hump Hose Coupler
30,03 € excl. VAT

Mishimoto MMCP-25NPTBK

misMMCP-25NPTBK
Mishimoto 2.5in Black Silicone Coupler w/ 1/8in NPT Bung
54,78 € excl. VAT

Mishimoto MMCP-30NPTBK

misMMCP-30NPTBK
Mishimoto 3.0in Black Silicone Coupler w/ 1/8in NPT Bung
54,90 € excl. VAT

Mishimoto MMCP-3HPBK

misMMCP-3HPBK
Mishimoto 3in. Hump Hose Silicone Coupler - Black
36,08 € excl. VAT

Mishimoto MMCP-3HPRD

misMMCP-3HPRD
Mishimoto 3in. Hump Hose Silicone Coupler - Red
36,26 € excl. VAT