Hangers & Brackets

Is your exhaust rattling against the underbody, or does your new system need to hang securely? In this category we bring together hangers, rubber mounts and brackets that keep the exhaust in place and dampen vibrations. The parts are for you if you are replacing worn original hangers or fitting a new exhaust system in a project.

What do exhaust hangers and rubber mounts do?

The exhaust typically hangs from the underbody via rods and rubber mounts that let the system move slightly while the engine vibrates. Worn or cracked rubber mounts can cause rattling, make pipes or mufflers knock against the underbody and increase the load on joints and flanges. Under exhaust hangers you will find rods, brackets and vehicle-specific kits, while rubber mounts and bushings are the flexible links in between.

How to choose hangers and bushings

The choice depends on the car, the exhaust and how the car is used. In particular, consider:

• Fitment: vehicle-specific kits, e.g. from Torque Solution or Kartboy, are made for specific models, while universal hangers such as the BLOX 4-hole model require more adaptation.
• Dimensions: hole size, distance between the holes and thickness must match the rods on the car and the exhaust – Cusco, for example, specifies its bushings with exactly these dimensions.
• Stiffness: a stiffer hanger can hold the exhaust more steadily, but can also transfer more vibration and noise into the cabin.
• Material: for weight-focused projects there are, for example, hollow titanium rods from Vibrant.

Installation and maintenance

Hangers are typically replaced with the car raised, and a rubber-safe lubricant can make it easier to get the bushings onto the rods. Afterwards, check that the exhaust hangs freely without touching the underbody, fuel tank or brake lines. If you are also switching to a new exhaust system or new mufflers, check whether the mounting points match. Rubber mounts can become brittle over time from heat and road salt, so inspect them during servicing. The category also includes brands such as Magnaflow, Stainless Works, Ticon and Diamond Eye Performance.

Frequently asked questions

How do I know an exhaust hanger needs replacing?

Typical signs are rattling or knocking from the underbody, an exhaust that hangs lower than before, or visible cracks and brittle rubber. Also check whether pipes or mufflers show wear marks from contact with the underbody.

Should I choose a vehicle-specific kit or universal hangers?

A vehicle-specific kit is made to fit specific models and is typically easier to install. Universal hangers give freedom in projects with a custom-built exhaust, but require you to check dimensions and placement yourself.

Can stiffer rubber mounts cause more noise in the cabin?

Yes, they can. A stiffer mount typically dampens less, so more vibrations can be transmitted to the body. How noticeable it is depends on the car, the exhaust and the engine mounts.

Do exhaust hangers matter for vehicle inspection?

A loosely hanging or leaking exhaust can lead to a remark at inspection. Whether a specific part and installation is acceptable depends on the product and the car, so check this for the specific part number and your car.