0

Engine Gaskets & Seals

Is your engine stripped down on the bench, or does a single joint need sealing again? This category brings together gaskets for the engine's fixed joints: cylinder head, intake manifold, valve cover, oil pan and thermostat housing, as well as complete gasket sets. It is for you if you are rebuilding, maintaining or building a project with more power.

What engine gaskets need to do

Gaskets seal where two engine parts meet and keep compression, oil and coolant separated. The head gasket is typically the most heavily loaded, because it has to withstand combustion pressure and heat and, in a turbo project, higher boost pressure as well. Among our head gaskets you will find, for example, Cometic Gasket in several bores and thicknesses. For the smaller joints there are intake manifold gaskets as well as gaskets for the valve cover, oil pan and thermostat housing. The category also includes cylinder base gaskets for motorcycles, such as the Kawasaki ZX-6R and Suzuki GSXR.

How to choose the right gasket

  • Bore: The hole in the head gasket must match the cylinder bore, including after any overboring.
  • Thickness: Affects the compression ratio and the clearance between piston and cylinder head, so it should be calculated for your project.
  • Material: MLS – multi-layer steel –, copper or composite. The choice depends on boost pressure, power target and the condition of the surfaces.
  • Engine code and model year: Fitment depends on the specific engine, so match the part number to the engine code and model year.

If the engine has to come apart anyway, a complete gasket set typically covers several joints at once. Fel-Pro, for example, offers intake manifold gasket sets for the Ford Mustang and Dodge Challenger and Charger, and Victor Reinz, Vertex Pistons and Wiseco are also brands in the category. A good seal typically depends on clean, flat surfaces, correct tightening torque and sequence, and new bolts where the manufacturer specifies them. Only use sealant if the gasket manufacturer recommends it. Gaskets for the exhaust manifold can be found under exhaust gaskets and seals.

Frequently asked questions

How do I choose the head gasket thickness?

The thickness affects the compression ratio and the clearance between piston and cylinder head. Calculate it for your project, especially if the cylinder head or block has been surfaced or the pistons have been replaced, and follow the manufacturer's instructions for the specific part number.

Can I reuse an old gasket?

It is typically not recommended. Many gaskets, such as MLS types, deform when first tightened and rarely seal as well a second time. It depends on the type, so check the manufacturer's instructions for the specific gasket.

What are the signs of a blown head gasket?

Typical signs can be coolant loss without visible leaks, white smoke, bubbles in the expansion tank, oil mixed with coolant or overheating. The symptoms can have other causes, so a compression or leak-down test gives a more reliable answer.

Should I choose a complete gasket set or individual gaskets?

If the engine is being fully disassembled, a gasket set typically covers most joints at once. If you only need to seal, for example, the valve cover or thermostat housing, a single gasket is often enough. Always check what the set contains for your part number.

View as Grid List
Sort by
Display per page

Toyt 2RZ-FE/3RZ-FE Exhaust Manifold

cgsC4207-030
Cometic Toyota 2RZ/3RZ-FE 95-UP Exhaust .030 inch MLS Head Gasket 1.730 inch X 1.460 inch Port
41,04 € excl. VAT

Toyt 2RZ-FE/3RZ-FE Top End Gasket Kit

cgsPRO2043T-960-040
Cometic Toyota 2RZ-FE/3RZ-FE Top End Gasket Kit - 96mm Bore - .040in MLS Cylinder Head Gasket
333,38 € excl. VAT

Toyt 2RZ-FE/3RZ-FE Top End Gasket Kit

cgsPRO2043T-960-051
Cometic Toyota 2RZ-FE/3RZ-FE Top End Gasket Kit - 96mm Bore - .051in MLS Cylinder Head Gasket
334,11 € excl. VAT

Toyt 2RZ-FE/3RZ-FE Top End Gasket Kit

cgsPRO2043T
Cometic 95-02 Toyota 2RZ/3RZ-FE 2.4L-2.7L 97mm Street Pro Top End Kit
329,94 € excl. VAT

Toyt 2RZ-FE/3RZ-FE Valve Cover Kit

cgsC4830
Cometic Toyota 2RZ-FE/3RZ-FE Valve Cover Gasket Kit
51,25 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4176-080
Cometic Toyota 1.6L 2T/2TC/3TC/3T-EU 89mm .080 inch MLS Head Gasket Celica/Camry/Corolla
156,06 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4258-066
Cometic Toyota 2T/2T-C/3T-C/3T-EU/13T-U .066in MLS Cylinder Head Gasket - 87mm Bore
144,59 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4258-060
Cometic Toyota 2T/2T-C/3T-C/3T-EU/13T-U .060in MLS Cylinder Head Gasket - 87mm Bore
144,56 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4258-075
Cometic Toyota 2T/2T-C/3T-C/3T-EU/13T-U .075in MLS Cylinder Head Gasket - 87mm Bore
144,93 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4176-070
Cometic Toyota 2T/2T-C/3T-C/3T-EU/13T-U .070in MLS Cylinder Head Gasket - 89mm Bore
145,50 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4176-045
Cometic Toyota 1.6L 2T/2TC/3TC/3T-EU 89mm .045 inch MLS Head Gasket
123,88 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4258-036
Cometic Toyota 2T/2T-C/3T-C/3T-EU/13T-U .036in MLS Cylinder Head Gasket - 87mm Bore
123,35 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4176-060
Cometic Toyota 1.6L 2T/2TC/3TC/3T-EU 89mm .060 inch MLS-5 Head Gasket
144,70 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4176-120
Cometic Toyota 1.6L 2T/2TC/3TC/3T-EU 89mm .120 inch MLS Head Gasket
256,84 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4258-080
Cometic Toyota 2T/2T-C/3T-C/3T-EU/13T-U .080in MLS Cylinder Head Gasket - 87mm Bore
156,29 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4371
Cometic Toyota 2T/2T-C/3T-C/3T-EU/13T-U .043in CFM-20 Cylinder Head Gasket - 89mm Bore
112,83 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4176-027
Cometic Toyota 1.6L 2T/2TC/3TC/3T-EU 89mm .027 inch MLS Head Gasket
123,88 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4258-030
Cometic Toyota 1.6L 2T/2TC/3TC/3T-EU 87mm .030 inch MLS Head Gasket Celica/Camry/Corolla
123,88 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4176-092
Cometic Toyota 2T/2T-C/3T-C/3T-EU/13T-U .092in MLS Cylinder Head Gasket - 89mm Bore
156,95 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4258-027
Cometic Toyota 1.6L 2T/2TC/3TC/3T-EU 87mm .027 inch MLS Head Gasket Celica/Camry/Corolla
123,88 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4176-075
Cometic Toyota 2T/2T-C/3T-C/3T-EU/13T-U .075in MLS Cylinder Head Gasket - 89mm Bore
144,93 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4176-030
Cometic Toyota 1.6L 2T/2TC/3TC/3T-EU 89mm .030 inch MLS Head Gasket
123,88 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4176-040
Cometic Toyota 1.6L 2T/2TC/3TC/3T-EU 89mm .040 inch MLS Head Gasket
123,88 € excl. VAT

Toyt 2T, 2/3T-C, 3T-EU, 13T-U Cylinder

cgsC4258-045
Cometic Toyota 1.6L 2T/2TC/3TC/3T-EU 87mm .045 inch MLS Head Gasket Celica/Camry/Corolla
123,88 € excl. VAT