0

Chassis & Suspension

Does your car feel soft in corners, is there knocking from the front wheels over bumps, or does the steering wheel pull to one side after a modification? In this category we bring together parts for suspension, bushings and mounts, steering and chassis. They are for you if you want to restore worn handling, raise or lower your car, or build a project for the track or off-road.

What suspension, steering and chassis parts do

The running gear determines how the tyres keep contact with the road and how calmly the car reacts to bumps, braking and cornering. Among the suspension parts you will find, for example, ICON shock absorbers for Toyota Tundra, GM HD and Ford F-250/F-350, as well as coilover kits where spring and damper are combined in one unit. Bilstein and KYB are also among the brands in the category. Other parts affect geometry and stiffness, such as ICON's adjustable track bar, camber bolts for wheel alignment or the QA1 Transmission X-Brace, a cross brace at the transmission. See also steering and chassis parts.

How to choose suspension

Start with the car and how you use it. For a pickup or off-road vehicle, the lift is crucial: the ICON shocks, for example, are divided by lift such as 0-1.5 or 4.5 inches, and the wrong length can limit travel or put strain on the shock. For street cars and the track, it is more about damping, spring rate and adjustment. Weigh up several factors:

  • Use: daily driving, towing, off-road and track place different demands on comfort and control.
  • Ride height: a changed height may require a new wheel alignment, caster correction, e.g. with the Old Man Emu Caster Kit, or an adjustable track bar.
  • Adjustment: adjustable shocks allow fine-tuning, but it takes time to find the right setting.
  • The whole picture: new springs rarely give the desired result if the shocks or bushings are worn.

Bushings and mounts – material and fit

Bushings and mounts absorb movement between arms, axles and body. They are typically available in rubber or polyurethane. Polyurethane can give more precise steering, but can also transmit more vibration and noise. The category includes, for example, the Old Man Emu Bushing Kit and Rugged Ridge bushings for the track bar on the 1987-95 Jeep Wrangler YJ, and Superpro and Moog are also among the brands. Check model year, drivetrain and front or rear position, as many parts are specific. The ICON parts for F-250/F-350, for example, are divided by 4WD and lift.

Installation, wheel alignment and inspection

Suspension and steering parts directly affect safety, so installation requires the correct tools and the right tightening torques. Rubber bushings are often only fully tightened once the car is standing on its wheels at normal ride height. Have a wheel alignment carried out after the work. Whether the modification requires an inspection or approval depends on the product and the car. Therefore, check the documentation for the specific part number before you install.

Frequently asked questions

Should shock absorbers be replaced in pairs?

Shock absorbers are typically replaced in pairs on the same axle so that damping is equal on both sides. Uneven damping can cause the car to behave unevenly under braking and in corners.

When do polyurethane bushings make sense instead of rubber?

Polyurethane can be relevant if you prioritise precision and less movement in the arms, e.g. for the track or heavy loads. For pure comfort, rubber may be better, as polyurethane typically transmits more vibration and noise.

Does raising or lowering the car require an inspection?

It depends on the extent of the modification, the product and the car. Check the documentation for the specific part number and the applicable rules before you install. A changed ride height can also affect headlight alignment and wheel alignment.

What does a caster kit do?

A caster kit corrects the wheel's caster angle, which can change when the car is raised. Too little caster can result in unstable and light steering at higher speeds. The need depends on the car and how much it has been raised.

Chassis & Suspension
View as Grid List
Sort by
Display per page

Ford Truck F150 F250 F350;R;B6

bil24-013291
Bilstein 4600 Series 1999 Ford F-350 SD XL RWD Cab & Chassis Rear 46mm Monotube Shock Absorber
128,15 € excl. VAT

Foretravel U-300 Chassis HD;F;ksw

bil24-018685
Bilstein B6 90-99 Spartan EC2000 Rear Monotube Shock Absorber - 21.61in Extended Length
154,83 € excl. VAT

FOX 2.0 FACTORY RACE ATS STABILIZER

fox983-02-243
Fox Factory 24-25 Ineos Grenadier Race Series 2.0 ATS Stabilizer
600,63 € excl. VAT

FOX 2.0 FACTORY RACE ATS STABILIZER

fox983-02-147
Fox 08-13 Ram 2500/3500 4WD 2.0 Factory Series ATS Steering Stabilizer - Anodized
600,47 € excl. VAT

FOX 2.0 FACTORY RACE ATS STABILIZER

fox983-02-142
Fox 07-18 Jeep Wrangler JK 2.0 Factory Race Series ATS Stabilizer 1-1/2in Tie Rod
601,73 € excl. VAT

FOX 2.0 FACTORY RACE ATS STABILIZER

fox983-02-146
Fox 07+ Jeep JK 2.0 Factory Series 8.1in. ATS Stabilizer Steering Damper 1-5/8 in. Tie Rod
601,79 € excl. VAT

FOX 2.0 FACTORY RACE ATS STABILIZER

fox983-02-145
Fox 2007+ Jeep JK 2.0 Factory Series ATS Steering Stabilizer 22.15in Ext L - Orange Heritage Logo
601,75 € excl. VAT

FOX 2.0 FACTORY RACE BUMP STOP

fox981-20-042
Fox Factory Race 2.0 X 3.0 Bump Stop
410,15 € excl. VAT

FOX 2.0 FACTORY RACE BUMP STOP

fox981-20-041
Fox Factory Race 2.0 X 2.5 Bump Stop
388,90 € excl. VAT

FOX 2.0 FACTORY SERIES ATS STABILIZER

fox983-02-143
Fox 17-26 Ford F250/F350 4WD 2.0 Factory Race Series 8.1in ATS Stabilizer Stock Replacement
600,73 € excl. VAT

FOX 2.0 FACTORY SERIES BUMP STOP IFP

fox983-02-170
FOX Factory Race Series GEN2 2in. Universal Front Bump Stop IFP (Threaded Body)
493,10 € excl. VAT

FOX 2.0 FACTORY SERIES BUMP STOP IFP

fox883-02-167
Fox 18-Up Jeep JL / 20-Up Gladiator 2.0 Factory Series Gen2 2.0in. Trvl 10in Ext Front Bump Stop IFP
896,32 € excl. VAT

FOX 2.0 FACTORY SERIES BUMP STOP IFP

fox883-02-155
Fox 07-18 Jeep JK 2.0 Factory Series 2in Travel Rear Gen2 Bump Stop IFP (Pair)
906,00 € excl. VAT

FOX 2.0 FACTORY SERIES BUMP STOP IFP

fox883-02-168
Fox 2018+ Jeep JL 2.0 Factory Series 1.853in Travel Rear Bump Stops IFP (Pair)
904,36 € excl. VAT

FOX 2.0 FACTORY SERIES BUMP STOP IFP

fox883-02-154
Fox 07+ Jeep JK 2.0 Factory Series 2.55in. Front Bump Stop IFP (Pair)
898,32 € excl. VAT