0

Brake Systems

Do you want your car to brake more consistently on the road, or does your project need brakes that can handle the heat of a track day? Here you will find parts for the entire brake system – from disc and drum brakes to master cylinders, brake boosters, handbrakes and valves – for daily driving, restoration and motorsport.

What the brake system components do

The brake system converts the pressure from the pedal into friction at the wheels. The master cylinder and brake booster create and amplify the hydraulic pressure, while disc brakes or drum brakes convert it into braking force. Valves control the pressure: a proportioning valve can adjust the balance between the front and rear axle, and a residual pressure valve can maintain a low pressure in the system, typically with drum brakes. On top of that come handbrakes, vacuum pumps for engines with too little vacuum for the booster, and exhaust brakes for diesel engines.

How to choose brake parts

Start with how the car is used. For daily driving, it is about smooth braking performance and low noise. For hard driving, heat tolerance is important, because overheating can cause braking performance to fade. Consider, among other things:

  • Use and temperature: The pad compound and rotor type should match how hot the brakes get.
  • Rotor type: Drilled, slotted and two-piece rotors, e.g. from DBA for the Nissan GT-R, 370Z and Corvette C6, are alternatives to solid rotors. Whether they offer an advantage depends on the car and its use.
  • Balance: Larger rotors or calipers on one axle can change the brake bias and may require adjustment.
  • Fitment: Wheels, hubs and existing calipers determine what can be fitted. Some rotors are only designed for specific factory systems.

In this category you will find brands such as Wilwood, EBC, PowerStop, R1 Concepts and Brembo, as well as complete kits, e.g. Baer Brakes' rear brake kits for classic GM rear axles. If you change calipers, check whether the master cylinder's capacity is still suitable, so that pedal travel and pressure are not changed undesirably.

Installation and maintenance

Brakes are safety-critical, so installation should be carried out by someone with experience, and the system must be bled afterwards. Use the correct tightening torques and the right hardware – for two-piece rotors, for example, separate bolts and nuts are available. Brake fluid absorbs moisture over time and can boil under hard use, which can result in a soft or long pedal. That is something different from overheated pads and rotors losing friction. So change the fluid regularly and check the wear on pads and rotors.

Frequently asked questions

Are drilled and slotted brake rotors better than solid rotors?

Not necessarily. Drilled and slotted rotors can help carry gas and heat away, but whether they offer an advantage depends on the car, the pads and the use. Solid rotors can be just as suitable.

Do new brake parts need to be approved for inspection?

It depends on the product and the car. Check the approval, e.g. E-mark or R90 for pads and rotors, for the specific part number, and find out whether changes to the brake system must be declared at the vehicle inspection.

Why does the brake pedal become soft or long?

It can be caused by air in the system or by brake fluid that has absorbed moisture and boils at high temperatures. Bleeding and fresh fluid of the right type often solve the problem.

Do I need to replace the master cylinder when I upgrade the brakes?

It depends on the change. Calipers with different piston sizes can require a different fluid volume, so the pedal travel changes. Check whether the existing master cylinder suits the new system.

Brake Systems
View as Grid List
Sort by
Display per page

SNAP RING,LEVER,C-CLIP,HB1P,BLACK

wil240-5780
Wilwood snap ring lever c-clip HB1P black phosphate
6,62 € excl. VAT

SPACER KIT,BRACKET,CALIPER,DL,DISC/DRUM

wil300-11542
Wilwood Bracket Spacer Kit .482 DL Rear Internal P-Brake Kit-2.50/2.80 Offset
45,50 € excl. VAT

SPACER KIT,BRACKET,CALIPER,DL,DISC/DRUM

wil300-11544
Wilwood Bracket Spacer Kit .630 DL Rear Internal P-Brake Kit-2.36/2.75 Offset
51,79 € excl. VAT

SPACER KIT,BRACKET,CALIPER,DL,DISC/DRUM

wil300-11545
Wilwood Bracket Spacer Kit .732 DL Rear Internal P-Brake Kit-2.66 Offset
45,69 € excl. VAT

SPACER KIT,BRACKET,CALIPER,DL,DISC/DRUM

wil300-11543
Wilwood Bracket Spacer Kit .588 DL Rear Internal P-Brake Kit-2.42 Offset
51,78 € excl. VAT

SPACER KIT,BRACKET,CALIPER,SL,DISC/DRUM

wil300-12965
Wilwood spacer kit bracket caliper sl DISC/DRUM .630 LG 2.75 offset
40,05 € excl. VAT

SPACER KIT,BRACKET,CALIPER,SL,DISC/DRUM

wil300-11879
Wilwood spacer kit bracket caliper sl DISC/DRUM .220 LG .250 off
65,66 € excl. VAT

SPACER,.453 IDx1.00 ODx.300 THK,MILD

wil300-10827
Wilwood spacer .453 IDX1.00 ODX.300 THK mild steel black
8,80 € excl. VAT

SPACER,BRACKET,.325 LG,BLACK

wil300-7045
Wilwood spacer alum .750 ODX.394 IDX.325 LG black
11,24 € excl. VAT

SPACER,BRACKET,.385 LG

wil300-12970
Wilwood spacer alum .750 ODX.394 IDX.385 LG black
13,86 € excl. VAT

SPACER,BRACKET,.520 LG

wil300-12025
Wilwood spacer alum .750 ODX.394 IDX.520 LG black
13,86 € excl. VAT

SPACER,BRACKET,.525 LG,BNA,EPB

wil300-16065
Wilwood .525 LG Bracket Spacer BNA EPB
20,11 € excl. VAT

SPACER,BRACKET,.640 LG,GP300C,H-D,REAR

wil300-3566
Wilwood spacer bracket .640 LG GP300C H-D rear 11.50 dia rotor chrome
32,58 € excl. VAT

SPACER,BRACKET,.640 LG,GP300C,H-D,REAR

wil300-3566-BK
Wilwood spacer bracket .640 LG GP300C H-D rear 11.50 dia rotor black
24,66 € excl. VAT

SPACER,BRACKET,.750 LG

wil300-12515
Wilwood Bracket Spacer (Tubular) .750 Length
11,77 € excl. VAT

SPACER,BRACKET,.750 OD,.391 ID,.590

wil300-13495
Wilwood spacer alum .750 ODX.394 IDX.590 LG black
11,23 € excl. VAT

SPACER,BRACKET,.88x.39x.75 LG

wil300-1162
Wilwood spacer bracket .88X.39X.75 LG
9,81 € excl. VAT