0

Brake Systems

Do you want your car to brake more consistently on the road, or does your project need brakes that can handle the heat of a track day? Here you will find parts for the entire brake system – from disc and drum brakes to master cylinders, brake boosters, handbrakes and valves – for daily driving, restoration and motorsport.

What the brake system components do

The brake system converts the pressure from the pedal into friction at the wheels. The master cylinder and brake booster create and amplify the hydraulic pressure, while disc brakes or drum brakes convert it into braking force. Valves control the pressure: a proportioning valve can adjust the balance between the front and rear axle, and a residual pressure valve can maintain a low pressure in the system, typically with drum brakes. On top of that come handbrakes, vacuum pumps for engines with too little vacuum for the booster, and exhaust brakes for diesel engines.

How to choose brake parts

Start with how the car is used. For daily driving, it is about smooth braking performance and low noise. For hard driving, heat tolerance is important, because overheating can cause braking performance to fade. Consider, among other things:

  • Use and temperature: The pad compound and rotor type should match how hot the brakes get.
  • Rotor type: Drilled, slotted and two-piece rotors, e.g. from DBA for the Nissan GT-R, 370Z and Corvette C6, are alternatives to solid rotors. Whether they offer an advantage depends on the car and its use.
  • Balance: Larger rotors or calipers on one axle can change the brake bias and may require adjustment.
  • Fitment: Wheels, hubs and existing calipers determine what can be fitted. Some rotors are only designed for specific factory systems.

In this category you will find brands such as Wilwood, EBC, PowerStop, R1 Concepts and Brembo, as well as complete kits, e.g. Baer Brakes' rear brake kits for classic GM rear axles. If you change calipers, check whether the master cylinder's capacity is still suitable, so that pedal travel and pressure are not changed undesirably.

Installation and maintenance

Brakes are safety-critical, so installation should be carried out by someone with experience, and the system must be bled afterwards. Use the correct tightening torques and the right hardware – for two-piece rotors, for example, separate bolts and nuts are available. Brake fluid absorbs moisture over time and can boil under hard use, which can result in a soft or long pedal. That is something different from overheated pads and rotors losing friction. So change the fluid regularly and check the wear on pads and rotors.

Frequently asked questions

Are drilled and slotted brake rotors better than solid rotors?

Not necessarily. Drilled and slotted rotors can help carry gas and heat away, but whether they offer an advantage depends on the car, the pads and the use. Solid rotors can be just as suitable.

Do new brake parts need to be approved for inspection?

It depends on the product and the car. Check the approval, e.g. E-mark or R90 for pads and rotors, for the specific part number, and find out whether changes to the brake system must be declared at the vehicle inspection.

Why does the brake pedal become soft or long?

It can be caused by air in the system or by brake fluid that has absorbed moisture and boils at high temperatures. Bleeding and fresh fluid of the right type often solve the problem.

Do I need to replace the master cylinder when I upgrade the brakes?

It depends on the change. Calipers with different piston sizes can require a different fluid volume, so the pedal travel changes. Check whether the existing master cylinder suits the new system.

Brake Systems
View as Grid List
Sort by
Display per page

Rtr 2pc 14x75012x945 LH Pln

bae6910969
Baer Brakes 14.000in x .750in 2-Piece LH Replacement Rotor - Plain
303,78 € excl. VAT

Rtr 2pc 14x75012x945 LH SDZ

bae6910974
Baer Brakes 14.000in x .750in 2-Piece LH Replacement Rotor - SDZ
337,07 € excl. VAT

Rtr 2pc 14x75012x945 LH Slot

bae6910971
Baer Brakes 14.000in x .750in 2-Piece LH Replacement Rotor - Slotted
337,07 € excl. VAT

Rtr 2pc 14x75012x945 RH Pln

bae6920969
Baer Brakes 14.000in x .750in 2-Piece RH Replacement Rotor - Plain
303,78 € excl. VAT

Rtr 2pc 14x75012x945 RH SDZ

bae6920974
Baer Brakes 14.000in x .750in 2-Piece RH Replacement Rotor - SDZ
337,07 € excl. VAT

Rtr 2pc 14x75012x945 RH Slot

bae6920971
Baer Brakes 14.000in x .750in 2-Piece RH Replacement Rotor - Slotted
337,07 € excl. VAT

Rtr 2pc 15x125012x945 LH Pln

bae6910307
Baer Brakes 15.000in x 1.250in 2-Piece LH Replacement Rotor - Plain
626,48 € excl. VAT

Rtr 2pc 15x125012x945 LH SDZ

bae6910312
Baer Brakes 15.000in x 1.250in 2-Piece SDZ Replacement Rotor - LH
659,77 € excl. VAT

Rtr 2pc 15x125012x945 LH Slot

bae6910309
Baer Brakes 15.000in x 1.250in 2-Piece LH Replacement Rotor - Slotted
647,29 € excl. VAT

Rtr 2pc 15x125012x945 RH Pln

bae6920307
Baer Brakes 15.000in x 1.250in 2-Piece RH Replacement Rotor - Plain
626,48 € excl. VAT

Rtr 2pc 15x125012x945 RH SDZ

bae6920312
Baer Brakes 15.000in x 1.250in 2-Piece SDZ Replacement Rotor - RH
659,77 € excl. VAT

Rtr 2pc 15x125012x945 RH Slot

bae6920309
Baer Brakes 15.000in x 1.250in 2-Piece RH Replacement Rotor - Slotted
647,29 € excl. VAT

Rtr 2pc14x115012x85 LH SDZ

bae6910222
Baer Brakes 14.000in x 1.150in 2-Piece LH Replacement Rotor - SDZ
595,44 € excl. VAT

Rtr 2pc14x115012x85 RH SDZ

bae6920222
Baer Brakes 14.000in x 1.150in 2-Piece RH Replacement Rotor - SDZ
595,44 € excl. VAT

Rtr Hdwr NAS Hex Bolt 12pk

bae2000031
Baer Brakes Rotor Hardware, NAS Hex Head Bolts - 12 Pack
63,62 € excl. VAT

Rtr Hdwr NAS Nut Washers 12pk

bae2000028
Baer Brakes Rotor Hardware, NAS Hex Locking Nuts & Washers - 12 Pack
46,90 € excl. VAT

Rtr Hdwr NAS Nuts Only 12pk

bae2000049
Baer Brakes Rotor Hardware, NAS Hex Locking Nut - 12 Pack
39,89 € excl. VAT

Rtr Hdwr NAS TriWing Bolt 12pk

bae2000034
Baer Brakes Rotor Hardware, NAS Tri-Wing Bolts - 12 Pack
63,62 € excl. VAT

Rtr Hdwr TriWing Tool

bae6290001
Baer Brakes Rotor Hardware, NAS Tri-Wing Bolt Tool
20,68 € excl. VAT

SCREW,1/4-14 (#14)x.75 LG,DRILL PT. #3

wil230-12708
Wilwood screw 1/4-14 (#14)X.75 LG drill PT. #3 3/8HEX washer head self drill steel zinc
5,98 € excl. VAT

SEAL,DUST BOOT,DP,1.25/1.75

wil210-7210
Wilwood Dust Boot Piston Dynapro / BNSL4
15,90 € excl. VAT

SEAL,DUST BOOT,HVC1,212B

wil212-9847
Wilwood HVC1 Dust Boot Seal 212B
15,90 € excl. VAT

SEAL,DUST BOOT,M/C,5/8

wil210-7133
Wilwood Dust Boot H/V & Compact Remote Master Cylinders
11,77 € excl. VAT